USER MANUAL

ENGLISH

USE

WARNING!

On some points of the machine there are some adhesive plates indicating:

−DANGER

−WARNING

−CAUTION

−CONSULTATION

While reading this Manual, the operator must pay particular attention to the symbols shown.

Do not cover these plates for any reason and immediately replace them if they are damaged.

GENERAL CAUTIONS

This machine is designed as a high performance, high capacity sweeper that can clean in tight and congested areas. By design this means a narrow wheel base with tight steering capability.

These design requirements can under certain conditions create instability during machine operation.

Instability can be caused by a combination of machine travel speed, abrupt maneuvering, operation on an incline, low tyre pressure, weight in the hopper and or raised hopper.

For this reason the machine must be driven by a qualified operator who must be properly instructed on how to use it and be aware of the potential risks.

The following are situations known to cause instability in the machine and care should be taken by the operator to assure safe operation:

–Lifting the hopper on an incline

–Maneuvering the machine with the hopper lifted

–Abrupt steering

–Maneuvering with speed, on a slope and/or with weight in the hopper

–Low tyre pressure

Inside the cab there is a decal (19, Fig. E) that warns the operator of the risk of instability and provides information on activities to avoid to prevent machine instability (see picture).

BEFORE START-UP

1.If necessary, open the right upper lid (28, Fig. G) by releasing the fastener (29) with the supplied key, and refuel the machine through the filler neck (10, Fig. F).

CAUTION!

Do not fill the fuel tank to the top, but leave at least 1.6 in (4 cm) from the filler neck to allow the fuel to expand.

Check the dust control system water level through the indicator (8, Fig. G).

If necessary, supply water according to the following procedure:

•Disengage the fastener (10, Fig. G) with the supplied key, then open the left lid (9).

•Pour the water in the tanks through the plug (30, Fig. F), or the hose (29).

•Close the plug (30), or roll up the hose (29) and place it back in its housing.

•Close the lid (9, Fig. G) and secure it with the fastener (10) by using the supplied key.

2.Check that there are no open lids/hoods and that the machine is in normal operating conditions.

RS 850

33014576(4)2008-02 A

17

Page 130 Page 132
Page 131
Image 131
Nilfisk-ALTO RS 850 manuel dutilisation Use, General Cautions, Before START-UP
Page 130 Page 132

RS 850 specifications

Nilfisk-ALTO RS 850: An Overview of Features, Technologies, and Characteristics

The Nilfisk-ALTO RS 850 is a sophisticated industrial vacuum cleaner designed to meet the rigorous demands of various sectors, including manufacturing, construction, and food processing. Recognized for its reliability, it offers a combination of powerful performance, advanced technology, and robust construction, making it an ideal choice for professionals seeking efficiency and effectiveness in their cleaning tasks.

One of the standout features of the RS 850 is its powerful motor which delivers impressive suction capabilities. With a high air flow rate, the vacuum can easily extract dust, dirt, and other debris from both hard and soft surfaces, ensuring a thorough clean. Its large capacity dust container allows for extended cleaning sessions without the need for frequent emptying, which increases productivity and reduces downtime.

The RS 850 also incorporates advanced filtration technology, including a HEPA filter that effectively traps fine particles and allergens. This feature is especially beneficial in environments where air quality is paramount, as it helps to maintain a cleaner, healthier workspace. The filter is washable, ensuring long-term use and reducing maintenance costs.

Designed with ergonomics in mind, the Nilfisk-ALTO RS 850 is equipped with user-friendly controls that simplify operation. Its lightweight design and maneuverability make it easy to transport to various job sites, while the durable construction ensures it can withstand tough working conditions. The machine features robust wheels and an adjustable handle, allowing for seamless navigation across different terrains.

Moreover, the RS 850 showcases a range of attachments and accessories that enhance its versatility. Users can easily switch between different nozzles and brushes, allowing for tailored cleaning solutions for various surfaces, whether it be hard floors, carpets, or upholstery.

A significant advantage of the Nilfisk-ALTO RS 850 is its low noise operation, making it suitable for use in noise-sensitive environments. This feature permits cleaning activities during business hours without disrupting workflows.

In conclusion, the Nilfisk-ALTO RS 850 stands out as a top-tier industrial vacuum cleaner. Its powerful suction, effective filtration, user-centric design, and versatility make it an essential tool for professionals dedicated to maintaining a clean and efficient work environment. Whether in manufacturing, construction, or other demanding applications, the RS 850 delivers exceptional performance and reliability, reinforcing Nilfisk’s commitment to quality and innovation in cleaning technology.
Top Page Image Contents