ENGLISH

USER MANUAL

SALT SPREADER ASSEMBLY AND USE (optional)

Salt spreader assembly

CAUTION!

To install this equipment, the sweeper should be equipped with the appropriate fitting.

1.Empty the hopper (7, Fig. G); if it contains a small quantity of waste, it is not necessary to dump it.

2.Operating according to the safety rules, with a suitable hoisting system (8, Fig. AU), attach the salt spreader (9) to the lifting hook (5).

The equipment weights 198.4 lb (90 kg) approximately.

3.Operating on a level ground, bring the sweeper into a suitable position (10, Fig. AU) to install the salt spreader (9).

4.Lift the hopper (7, Fig. G) and install the support rods (3, Fig. F) (see the procedure in the relevant paragraphs).

5.Turn off the engine and engage the parking brake (13, Fig. E).

6.With the hoisting system (8, Fig. AU), position the salt spreader (9) on the sweeper and secure it with screws (11) and nuts (12).

7.Disconnect the hoisting system (8, Fig. AU) from the salt spreader (9).

8.Remove the protection cover, then connect the hydraulic system quick couplings (13, Fig. AU) to the corresponding pipe couplings (14).

9.Connect the electric connector (15, Fig. AU) to the corresponding socket (16).

10.Open the left side lower lid (11, Fig. G) by disengaging the fastener (12) with the supplied key.

11.Turn the lever (17, Fig. AU) from the position (17a) to activate the 3rd broom to the position (17b) to activate the salt spreader.

12.Close the left side lower lid (11, Fig. G) by engaging the fastener (12) with the supplied key.

13.Remove the lifted hopper support rods (3, Fig. F) and lower the hopper (7, Fig. G) (see the procedure in the relevant paragraphs).

14.Now the machine is ready to operate with the salt spreader.

Salt spreader disassembly

15.Disassemble the salt spreader in the reverse order of assembly.

16.Secure and protect the salt spreader properly.

Salt spreader use

17.Assemble the salt spreader (9, Fig. AU) according to the procedure shown in the relevant paragraphs.

18.Load suitable salt in the compartment (2, Fig. AU).

19.Adjust the salt flow with the control lever (1, Fig. AU).

20.To activate the salt spreader, use the 3rd broom controls.

21.To change the salt spreader speed according to engine speed, use the knob (18, Fig. AU).

28

33014576(4)2008-02 A

RS 850

Page 141 Page 143
Page 142
Image 142
Nilfisk-ALTO RS 850 manuel dutilisation Salt spreader assembly, Salt spreader disassembly, Salt spreader use
Page 141 Page 143

RS 850 specifications

Nilfisk-ALTO RS 850: An Overview of Features, Technologies, and Characteristics

The Nilfisk-ALTO RS 850 is a sophisticated industrial vacuum cleaner designed to meet the rigorous demands of various sectors, including manufacturing, construction, and food processing. Recognized for its reliability, it offers a combination of powerful performance, advanced technology, and robust construction, making it an ideal choice for professionals seeking efficiency and effectiveness in their cleaning tasks.

One of the standout features of the RS 850 is its powerful motor which delivers impressive suction capabilities. With a high air flow rate, the vacuum can easily extract dust, dirt, and other debris from both hard and soft surfaces, ensuring a thorough clean. Its large capacity dust container allows for extended cleaning sessions without the need for frequent emptying, which increases productivity and reduces downtime.

The RS 850 also incorporates advanced filtration technology, including a HEPA filter that effectively traps fine particles and allergens. This feature is especially beneficial in environments where air quality is paramount, as it helps to maintain a cleaner, healthier workspace. The filter is washable, ensuring long-term use and reducing maintenance costs.

Designed with ergonomics in mind, the Nilfisk-ALTO RS 850 is equipped with user-friendly controls that simplify operation. Its lightweight design and maneuverability make it easy to transport to various job sites, while the durable construction ensures it can withstand tough working conditions. The machine features robust wheels and an adjustable handle, allowing for seamless navigation across different terrains.

Moreover, the RS 850 showcases a range of attachments and accessories that enhance its versatility. Users can easily switch between different nozzles and brushes, allowing for tailored cleaning solutions for various surfaces, whether it be hard floors, carpets, or upholstery.

A significant advantage of the Nilfisk-ALTO RS 850 is its low noise operation, making it suitable for use in noise-sensitive environments. This feature permits cleaning activities during business hours without disrupting workflows.

In conclusion, the Nilfisk-ALTO RS 850 stands out as a top-tier industrial vacuum cleaner. Its powerful suction, effective filtration, user-centric design, and versatility make it an essential tool for professionals dedicated to maintaining a clean and efficient work environment. Whether in manufacturing, construction, or other demanding applications, the RS 850 delivers exceptional performance and reliability, reinforcing Nilfisk’s commitment to quality and innovation in cleaning technology.
Top Page Image Contents