Setting the machine to working mode

ENGLISH

USER MANUAL

Set the machine to working mode according to the following procedure:

1.Start the engine as shown in the relevant paragraph.

2.Check that the hopper (7, Fig. G) is lowered and that the warning light (18, Fig. D) is off.

3.Bring the 3rd broom safety arm from the position (1, Fig. H) (engaged) to the position (2) (disengaged).

4.Gradually bring forward the engine throttle lever (16, Fig. E) and set the engine speed on the display (17, Fig. D) to:

•minimum 1,800 rpm

•maximum 2,030 rpm

CAUTION!

If the engine speed exceeds 2,050 rpm in working mode, a safety system stops the broom rotation.

5.Turn on the suction fan with the lever (8, Fig. E).

6.Start the side broom rotation by turning the switch (29, Fig. D) to the ﬁrst position, and the 3rd broom rotation by turning the switch (29) to the second position.

7.Lower the suction inlet and side brooms by pressing the push-button (37, Fig. D).

NOTE

Side brooms lower only if the suction fan is on.

CAUTION!

Do not leave the sweeper stationary with the suction inlet lowered and the brooms rotating.

8.Shift the 3rd broom arm to working mode, by moving the joystick (46, Fig. D) to the right/left.

9.Lower the 3rd broom by pushing the joystick (46, Fig. D) forward.

10.If necessary, open the dust control system taps (10, 11, 12, Fig. E), considering the following:

•Suction pipe dust control system nozzle tap (10, Fig. E): Open it always, except when the ﬂoor to be cleaned is wet.

•This tap sends water also to the rear pipe dust control system nozzle (optional).

•Side broom dust control system nozzle tap (11, Fig. E): Open it when the ﬂoor is dry and dusty.

•3rd broom dust control system nozzle tap (12, Fig. E): Open it when the ﬂoor is dry and dusty.

11.Turn on the dust control system water pump with the switch (27, Fig. D) according to the following procedure:

•When the switch is turned to the ﬁrst position, the nozzles sprinkle a medium quantity of water (use it when there is little dust)

•When the switch is turned to the second position, the nozzles sprinkle the maximum quantity of water (use it when there is a lot of dust)

12.Disengage the parking brake with the lever (13, Fig. E).

13.Start sweeping, by keeping the hands on the steering wheel (28, Fig. D) and gradually pressing the pedal (26), on the front side to move forward and on the rear side to move backward.

The drive speed can be adjusted from zero to maximum speed by increasing the pressure on the pedal.

While working, the machine picks up both light materials such as dust, paper, leaves, etc. and heavy materials such as stones, bottles, etc.

NOTE

All brooms (19, 20, 21, Fig. G) can be lifted or lowered when the machine is moving.

The brooms rotate even when they are lifted.

33014576(4)2008-02 A

RS 850

RS 850 specifications

Nilfisk-ALTO RS 850: An Overview of Features, Technologies, and Characteristics

The Nilfisk-ALTO RS 850 is a sophisticated industrial vacuum cleaner designed to meet the rigorous demands of various sectors, including manufacturing, construction, and food processing. Recognized for its reliability, it offers a combination of powerful performance, advanced technology, and robust construction, making it an ideal choice for professionals seeking efficiency and effectiveness in their cleaning tasks.

One of the standout features of the RS 850 is its powerful motor which delivers impressive suction capabilities. With a high air flow rate, the vacuum can easily extract dust, dirt, and other debris from both hard and soft surfaces, ensuring a thorough clean. Its large capacity dust container allows for extended cleaning sessions without the need for frequent emptying, which increases productivity and reduces downtime.

The RS 850 also incorporates advanced filtration technology, including a HEPA filter that effectively traps fine particles and allergens. This feature is especially beneficial in environments where air quality is paramount, as it helps to maintain a cleaner, healthier workspace. The filter is washable, ensuring long-term use and reducing maintenance costs.

Designed with ergonomics in mind, the Nilfisk-ALTO RS 850 is equipped with user-friendly controls that simplify operation. Its lightweight design and maneuverability make it easy to transport to various job sites, while the durable construction ensures it can withstand tough working conditions. The machine features robust wheels and an adjustable handle, allowing for seamless navigation across different terrains.

Moreover, the RS 850 showcases a range of attachments and accessories that enhance its versatility. Users can easily switch between different nozzles and brushes, allowing for tailored cleaning solutions for various surfaces, whether it be hard floors, carpets, or upholstery.

A significant advantage of the Nilfisk-ALTO RS 850 is its low noise operation, making it suitable for use in noise-sensitive environments. This feature permits cleaning activities during business hours without disrupting workflows.

In conclusion, the Nilfisk-ALTO RS 850 stands out as a top-tier industrial vacuum cleaner. Its powerful suction, effective filtration, user-centric design, and versatility make it an essential tool for professionals dedicated to maintaining a clean and efficient work environment. Whether in manufacturing, construction, or other demanding applications, the RS 850 delivers exceptional performance and reliability, reinforcing Nilfisk’s commitment to quality and innovation in cleaning technology.

Nilfisk-ALTO RS 850 manuel dutilisation Setting the machine to working mode

Models: RS 850

ENGLISH