USER MANUAL

ENGLISH

Cleaning of nozzle and filter in the rear suction pipe (optional)

15.Loosen the clamp (1, Fig. Y) and separate the rigid part of the rear suction pipe (2) from the hose (3).

16.Operating inside the pipe (2, Fig. Y), with a 0.55 in (14 mm) socket wrench, unscrew the nozzle (4) and remove the filter (5) (check the actual position of the nozzle).

17.Clean the nozzle (4, Fig. Y) and filter (5) with compressed air. Remove calcium deposits. If necessary, replace the filter (5).

18.Install the filter and nozzle in the reverse order of removal.

19.Install the hose (3, Fig. Y) on the rigid part of the rear suction pipe (2) and secure with the clamp (1).

DUST CONTROL SYSTEM WATER FILTER CLEANING

WARNING!

Protect body parts (eyes, hair, hands, etc.) properly, when performing cleaning procedures using compressed air or water gun.

NOTE

When the filter is removed, the water inside the tanks comes out. It is advisable to perform this maintenance procedure when the tanks are empty.

1.Engage the parking brake (13, Fig. E).

2.Turn the ignition key (24, Fig. D) to OFF position and remove it.

3.Operating over the right side of the rear axle, unscrew the water filter cover (1, Fig. Z) and remove it together with the filter.

4.Separate the filter (2, Fig. Z) from the cover (3), then wash and clean them. If necessary, replace the filter.

5.Install the filter and the cover.

HYDRAULIC SYSTEM OIL LEVEL CHECK

CAUTION!

This procedure must be performed with the hopper (7, Fig. G) completely lowered.

1.Engage the parking brake (13, Fig. E).

2.Start the engine as shown in the relevant paragraph.

3.Open the left side lower lid (11, Fig. G) by disengaging the fastener (12) with the supplied key.

4.Check that the needle of the efficiency indicator (1, Fig. AA) of the hydraulic system discharge filter (2) is in the green area (3), otherwise the filter (2) must be replaced (see the procedure in the Service Manual).

5.Check that there are no oil leaks in the upper area (4, Fig. AA) of the hydraulic system oil tank, otherwise the tank breather filter (5) must be replaced (see the procedure in the Service Manual).

6.Stop the engine by turning the ignition key (24, Fig. D) to OFF position, then remove it.

7.Using the indicator (6, Fig. AA), check that the oil level in the tank is between the MIN and MAX marks.

8.If necessary, unscrew the plug (7, Fig. AA), remove the filter (2) and top up. For the types of oil to be used, see Technical Data chapter.

NOTE

Top up by using the same type of oil that is in the tank.

9.Install the filter (2, Fig. AA) and tighten the plug (7).

10.Close the left side lower lid (11, Fig. G) by engaging the fasteners (12) with the supplied key.

RS 850

33014576(4)2008-02 A

33

Page 146 Page 148
Page 147
Image 147
Nilfisk-ALTO RS 850 manuel dutilisation Dust Control System Water Filter Cleaning, Hydraulic System OIL Level Check
Page 146 Page 148

RS 850 specifications

Nilfisk-ALTO RS 850: An Overview of Features, Technologies, and Characteristics

The Nilfisk-ALTO RS 850 is a sophisticated industrial vacuum cleaner designed to meet the rigorous demands of various sectors, including manufacturing, construction, and food processing. Recognized for its reliability, it offers a combination of powerful performance, advanced technology, and robust construction, making it an ideal choice for professionals seeking efficiency and effectiveness in their cleaning tasks.

One of the standout features of the RS 850 is its powerful motor which delivers impressive suction capabilities. With a high air flow rate, the vacuum can easily extract dust, dirt, and other debris from both hard and soft surfaces, ensuring a thorough clean. Its large capacity dust container allows for extended cleaning sessions without the need for frequent emptying, which increases productivity and reduces downtime.

The RS 850 also incorporates advanced filtration technology, including a HEPA filter that effectively traps fine particles and allergens. This feature is especially beneficial in environments where air quality is paramount, as it helps to maintain a cleaner, healthier workspace. The filter is washable, ensuring long-term use and reducing maintenance costs.

Designed with ergonomics in mind, the Nilfisk-ALTO RS 850 is equipped with user-friendly controls that simplify operation. Its lightweight design and maneuverability make it easy to transport to various job sites, while the durable construction ensures it can withstand tough working conditions. The machine features robust wheels and an adjustable handle, allowing for seamless navigation across different terrains.

Moreover, the RS 850 showcases a range of attachments and accessories that enhance its versatility. Users can easily switch between different nozzles and brushes, allowing for tailored cleaning solutions for various surfaces, whether it be hard floors, carpets, or upholstery.

A significant advantage of the Nilfisk-ALTO RS 850 is its low noise operation, making it suitable for use in noise-sensitive environments. This feature permits cleaning activities during business hours without disrupting workflows.

In conclusion, the Nilfisk-ALTO RS 850 stands out as a top-tier industrial vacuum cleaner. Its powerful suction, effective filtration, user-centric design, and versatility make it an essential tool for professionals dedicated to maintaining a clean and efficient work environment. Whether in manufacturing, construction, or other demanding applications, the RS 850 delivers exceptional performance and reliability, reinforcing Nilfisk’s commitment to quality and innovation in cleaning technology.
Top Page Image Contents