Using the Rear Suction Pipe | Nilfisk-ALTO RS 850 specification

USER MANUAL

ENGLISH

USING THE REAR SUCTION PIPE (*)

(*)Optional for some countries.

To collect dust/debris with the rear suction pipe (optional) (43, Fig. G), rather than the suction inlet (17, Fig. G), perform the following procedure.

1.Turn off the engine and engage the parking brake with the lever (13, Fig. E).

2.Loosen the suction pipe mounting knobs (1, Fig. K), then remove the suction hole cover (2) using the knob (3).

3.As shown in the Hopper Dumping paragraph, lift the hopper for 3.9-5.9 in (10-15 cm) approximately, then turn off the engine.

4.Open the right upper lid (28, Fig. G) and remove the gasket (7, Fig. F).

5.With a suitable ladder, insert and secure the gasket (7, Fig. F) on the hopper suction hole (1, Fig. L).

6.Lower the hopper completely, as shown in the Hopper Dumping paragraph.

7.Release the fastener (42, Fig. G) of the rear suction pipe (43).

8.Open the support arm (45, Fig. G) and connect the chain (1, Fig. M) to the suction pipe to support it.

9.Open the dust control system nozzle tap (23, Fig. F).

10.Start the engine as shown in the relevant paragraph.

11.Check that the hopper (7, Fig. G) is lowered and that the warning light (18, Fig. D) is off.

12.Gradually bring forward the engine throttle lever (16, Fig. E) and set the engine speed on the display (17, Fig. D) to:

•minimum 1,800 rpm

•maximum 2,030 rpm

13.Turn on the suction fan with the lever (8, Fig. E).

14.Turn on the dust control system water pump with the switch (27, Fig. D) according to the following procedure:

•When the switch is turned to the ﬁrst position, the nozzles sprinkle a medium quantity of water (use it when there is little dust)

•When the switch is turned to the second position, the nozzles sprinkle the maximum quantity of water (use it when there is a lot of dust)

15.Disengage the parking brake with the lever (13, Fig. E).

16.With the help of an assistant, start to collect debris with the rear suction pipe, by grasping it as shown in Figure N.

While working, the machine picks up both light materials such as dust, paper, leaves, etc. and heavy materials such as stones, bottles, etc.

17.To restore the machine operation with the suction inlet (17, Fig. G), perform the steps from 2 to 15 in the reverse order.

USING THE WINDSCREEN WIPER/WASHER

1.Press the switch (23, Fig. D) to sprinkle the detergent on the windscreen.

2.Press the switch (33, Fig. D) to start and stop the windscreen wiper.

USING THE CAB HEATING

1.To turn on the cab heating, turn the knob (15, Fig. E) counterclockwise as necessary.

2.Adjust the blower speed with the knob (6, Fig. E).

3.To turn off the cab heating, turn the knob (15, Fig. E) clockwise to the end of stroke.

USING THE CAB CLIMATE CONTROL SYSTEM (*)

(*)Optional for some countries.

1.Turn the climate control knob (5, Fig. E) as necessary.

2.Adjust the blower speed with the knob (6, Fig. E).

RS 850

33014576(4)2008-02 A

RS 850 specifications

Nilfisk-ALTO RS 850: An Overview of Features, Technologies, and Characteristics

The Nilfisk-ALTO RS 850 is a sophisticated industrial vacuum cleaner designed to meet the rigorous demands of various sectors, including manufacturing, construction, and food processing. Recognized for its reliability, it offers a combination of powerful performance, advanced technology, and robust construction, making it an ideal choice for professionals seeking efficiency and effectiveness in their cleaning tasks.

One of the standout features of the RS 850 is its powerful motor which delivers impressive suction capabilities. With a high air flow rate, the vacuum can easily extract dust, dirt, and other debris from both hard and soft surfaces, ensuring a thorough clean. Its large capacity dust container allows for extended cleaning sessions without the need for frequent emptying, which increases productivity and reduces downtime.

The RS 850 also incorporates advanced filtration technology, including a HEPA filter that effectively traps fine particles and allergens. This feature is especially beneficial in environments where air quality is paramount, as it helps to maintain a cleaner, healthier workspace. The filter is washable, ensuring long-term use and reducing maintenance costs.

Designed with ergonomics in mind, the Nilfisk-ALTO RS 850 is equipped with user-friendly controls that simplify operation. Its lightweight design and maneuverability make it easy to transport to various job sites, while the durable construction ensures it can withstand tough working conditions. The machine features robust wheels and an adjustable handle, allowing for seamless navigation across different terrains.

Moreover, the RS 850 showcases a range of attachments and accessories that enhance its versatility. Users can easily switch between different nozzles and brushes, allowing for tailored cleaning solutions for various surfaces, whether it be hard floors, carpets, or upholstery.

A significant advantage of the Nilfisk-ALTO RS 850 is its low noise operation, making it suitable for use in noise-sensitive environments. This feature permits cleaning activities during business hours without disrupting workflows.

In conclusion, the Nilfisk-ALTO RS 850 stands out as a top-tier industrial vacuum cleaner. Its powerful suction, effective filtration, user-centric design, and versatility make it an essential tool for professionals dedicated to maintaining a clean and efficient work environment. Whether in manufacturing, construction, or other demanding applications, the RS 850 delivers exceptional performance and reliability, reinforcing Nilfisk’s commitment to quality and innovation in cleaning technology.

Nilfisk-ALTO RS 850 Using the Rear Suction Pipe, Using the Windscreen WIPER/WASHER

Models: RS 850