DOCUMENT TOO LONG

Cause

 

The document is longer than 1 m, or is not feeding correctly.

 

 

Remedy

 

Reduce the length of the document to within 1 m, and then copy it.

 

INSTALL CARTRIDGE

 

 

 

 

Cause

 

The cartridge is not installed or not installed correctly.

 

 

Remedy

 

Install the cartridge correctly. (See "Replacing the Cartridge," on p. 8-6.)

 

 

MEMORY FULL

 

 

 

 

 

Cause 1

 

The machine's memory is full because the collate copy or 2 on 1 copy function was set when a large

 

 

document is loaded.

 

 

Remedy

 

Divide the document and copy each part separately.

 

 

If <MEMORY FULL> appears while scanning documents using the ADF, the document being

 

 

scanned stops in the ADF. In this case, follow the procedure in "Removing Jammed Paper from the

 

 

ADF," on p. 9-6to clear the paper jam in the ADF.

 

 

Cause 2

 

You tried to reserve more than 11 copy jobs.

 

 

Remedy

 

The machine can store up to 10 copy jobs in memory. Wait until the current copy job completes, or

 

 

use [Status Monitor] to delete the reserved copy jobs in memory.

 

OUTPUT TRAY FULL

 

 

 

 

Cause

 

The output tray is full of paper.

 

 

Remedy

 

Pick up the printed pages in the output tray.

 

PRINTER DATA ERROR

 

 

 

 

Cause

 

When you canceled a job being processed, the next job on the spooled job list may have been also

 

 

deleted.

 

 

Remedy

 

Check if the job that immediately follows the job being processed has been deleted on the spooled

 

 

job list. Disconnect the USB cable and connect it again, or unplug the machine and plug it in again to

 

 

clear the error message.

 

 

REC. PAPER JAM

 

 

 

 

 

Cause

 

There is a paper jam.

 

 

Remedy

 

Clear the paper jam (See "Clearing Jams," on p. 9-1) and reload paper in the cassette or

 

 

multi-purpose feeder. Then reset the machine by opening the front cover and then closing it.

9

Troubleshooting

9-9