Canon MVX30i, MVX35i Printing, Memory Card Operation

Memory Card Operation

Memory card cannot be		Memory card was not facing	Turn the memory card over	93
inserted.		the correct direction.	and reinsert it.
Memory card cannot be		Memory card is full.	Replace the memory card or	93
recorded.			erase images.
		Memory card is not formatted.	Format the memory card.	120
		Memory card is not inserted.	Insert a memory card.	93
		File number reached	Set [FILE NUMBERS] to	96
		maximum value.	[RESET] and insert a new
			memory card.
		SD Memory Card is	Change the position of the	93
		protected.	protect switch.
Memory card cannot be		Camcorder is not set to	Set the camcorder to CARD	111
played back.		CARD PLAY mode.	PLAY mode.
		Memory card is not inserted.	Insert a memory card.	93
Camcorder does not		The camcorder displays the	Press the CARD STILL/MOVIE	111
display movies in CARD		still image playback mode.	button to switch to MPEG-4
PLAY mode.			movie playback.
		The movie was recorded in	Motion JPEG movies are	111
		Motion JPEG format with	displayed in still image
		another camcorder.	playback mode. Press the
			CARD STILL/MOVIE button to
			switch to still image playback.
Image cannot be erased.		Image is protected.	Cancel the protection.	114
		SD memory card is	Change the position of the	93
		protected.	protect switch.
“	” flashes red.	Card error occurred.	Turn off the camcorder.	120
			Remove and reinsert the
			memory card. Format the
			memory card if flashing
			persists.

Printing

The printer is not	The camcorder is set to		1. Set the camcorder to		-
operating even though	NETWORK mode.		CARD PLAY mode.
camcorder and printer			2. Disconnect and reconnect
are correctly connected.			the USB cable.
			3. Turn off the printer and
			turn it back on.
	The camcorder displays the		Press the CARD STILL/MOVIE		111
	movie playback mode.		button to display the still
			image playback mode.
	[	CONNECT] is set to	Set [	CONNECT] to	134
	[STORAGE].		[STANDARD].

Shaded area : MVX35i only.

154