Turning On the Analog-Digital Converter

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

 

 

MVX35i

E

VCR SETUP

 

AV DV/ •••••OFF

 

(

35)

 

MVX30i

 

AV DV••••••••OFF

Open the menu and select [VCR SETUP]. Select [AV \DV/ ] (MVX35i) or [AV \DV] (MVX30i), set it to [ON] and close the menu.

❍Headphones cannot be used during analog-digital conversion.

❍Depending on the signal sent from the connected device, the conversion from analog to digital signals might not work properly (e.g., signals that include copyright protective signals or anomalous signals such as ghost signals).

❍When connecting to a TV/video with SCART terminal, use a SCART adapter with input capability (commercially available). The supplied SCART Adapter PC-A10 is for output only.

❍For normal use, set [AV \DV/ ] (MVX35i) or [AV \DV] (MVX30i) to [OFF]. If it is set to [ON], digital signals cannot be input via the camcorder’s DV terminal.

❍Depending on the software and the specifications of your computer, you may not be able to transfer converted signals via the DV terminal.

❍We recommend powering the camcorder from a household power source.

❍ You can also press the AV/DV button on the wireless controller. The setting changes with each press of the button.

❍ Users of Windows XP with Hi-Speed USB 2.0 port can output the signals to a computer using the USB cable by installing the Canon USB Video

Driver from the supplied DV Network Software ( 92).

Editing

87