Manuals / Brands / Photography / Camcorder / Canon / Photography / Camcorder

Canon MVX30i, MVX35i Adjusting the Volume, Adjusting the Volume, When Using Headphones, Turn the SET dial up to increase the volume, and down to lower the volume

1 163

Download 163 pages, 4.07 Mb

Adjusting the Volume

When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Use headphones when using the viewfinder.

Speaker	SET dial

H (phones) terminal

When Using Headphones

The headphones terminal also serves as AV terminal. Headphones can only be used when “H” is displayed on the screen. If not, change the setting following the procedure below.

CAMERA		PLAY (VCR)	CARD CAMERA	CARD PLAY
( 35)	VCR SETUP		AV/PHONES ••AV
( 35)

Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to [PHONES H] and close the menu.

❍The speaker does not sound when “H” is displayed.

❍Do not connect headphones unless “H” is displayed as it produces noise.

Adjusting the Volume

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

Turn the SET dial up to increase the volume, and down to lower the volume.

• A volume bar appears for 2 seconds.

•You can turn off the volume completely by turning the SET dial

down until [OFF] appears. Turn the SET dial up to increase the volume again.

30

Contents

Digital Video Camcorder Instruction Manual English PAL Important Usage Instructions Using this Manual Table of Contents Editing Using a Memory Card Direct Printing Transferring Images Additional Information Checking Supplied Accessories Components Guide Page Page Wireless Controller Preparing the Power Supply Using a Household Power Source 1.Turn the POWER switch to OFF 2.Connect the power cord to the power adapter 3.Plug the power cord into a power outlet 4.Connect the power adapter to the camcorder’s DC IN terminal Page Loading/Unloading a Cassette Installing the Backup Battery Preparing the Camcorder Using the Wireless Controller Setting the Time Zone, Date and Time 7.Press the MENU button to close the menu and to start the clock Displaying Date and Time during Recording Recording Movies on a Tape Allowing the Subject to Monitor the LCD Screen 1. Press the MENU button to open the menu 2. Turn the SET dial to select [DISPLAY SETUP/] and press the SET dial 3. Turn the SET dial to select [LCD MIRROR] and press the SET dial 4.Turn the SET dial to select [OFF] Screen Displays during Recording q Time code Reviewing and Searching when Recording Record Review Press and release the c (record review) button Record Search Press and hold the REC SEARCH + button (forward) or – Zooming 40⋅/200⋅ Digital Zoom (Card: 40⋅) 2.Turn the SET dial to select [CAMERA SETUP] and 3. Turn the SET dial to select [D.ZOOM] and press the SET dial 4.Turn the SET dial to select a setting option Tips for Making Better Videos Holding the Camcorder For More Stability Lighting Playing Back a Tape Special Playback Modes e/a (Playback Pause) 1 (Fast Forward Playback) / ` (Rewind Playback) –/4a (Reverse Playback) +/ae (Frame Advance) / –/4a (Frame Reverse) Adjusting the Volume Playing Back on a TV Screen TVs with Audio/Video Terminals TVs with S (S1)-VideoInput Terminal 1. Turn off all devices before starting the connections 2. Connect the S-150 S-videoCable (optional) to the S-videoterminals Selecting the Audio Output Channel 2.Turn the SET dial to select [AUTO SETUP] and press the SET dial 3. Turn the SET dial to select [OUTPUT CH] and press the SET dial 5.Turn the SET dial to select a setting option Menus and Settings Menu and Default Settings CAMERA MENU Page PLAY (VCR) MENU Page CARD CAMERA MENU Page CARD PLAY MENU Using the Recording Programs Auto Sports Portrait Spotlight Availability of Functions in Each Mode: Selecting the Easy Recording Program Set the program selector to Selecting the Program AE Mode 1.Set the program selector to Q 2.Press the SET dial 3. Select a mode and press the SET dial Using the Night Modes Using the Mini Video Light Page Skin Detail Function Adjusting Exposure Manually Adjusting the Focus Manually Infinity Focus Press the FOCUS button more than 2 seconds after step 2 in Adjusting the Focus Manually Setting the White Balance Page Setting the Shutter Speed Auto Slow Shutter Using the Self-Timer Changing the Recording Mode (SP/LP) Audio Recording Microphone Attenuator Using Headphones during Recording Adjusting the Headphone Volume Wind Screen Recording with an External Microphone 1. Attach the microphone to the adapter bracket 2. Attach the adapter bracket to the camcorder 3. Connect the microphone to the camcorder Using Digital Effects Faders (65) Fade Trigger (FADE-T) Wipe (WIPE) Corner Wipe (CORNER) Puzzle (PUZZLE) Zigzag (ZIGZAG) Beam (BEAM) Tide (TIDE) Effects (66) Art (ART) Sepia (SEPIA) & WHT) Mosaic (MOSAIC) Availability of Digital Effects by Operating Modes: Selecting a Fader 1.Press the DIGITAL EFFECTS button 2.Select [FADER] 3.Select the fader option Selecting an Effect 2.Select [EFFECT] 3.Select the effect 5.Press the ON/OFF button Selecting an Effect in CARD CAMERA Mode Using the Multi-ImageScreen 1. Press the DIGITAL EFFECTS button 2. Select [MULTI-S] 3. Select [S.SPEED] 4.Select the transition speed Page Magnifying the Image Displaying the Data Code Displaying the Data Code Press the DATA CODE button Six-SecondAuto Date End Search Returning to a Pre-markedPosition Date Search Customizing the Camcorder Changing the Display Language Changing the Remote Sensor Mode Other Camcorder Settings LCD Backlight Recording in 16:9 (Widescreen TV Recording) Turning Off the Image Stabilizer Demonstration Mode Recording to a VCR or Digital Video Device Page Recording from Analog Video Devices (VCR, TV or Camcorder) Recording from Digital Video Devices (DV Dubbing) Concerning Copyright Copyright Precaution Copyright Signals Converting Analog Signals into Digital Signals (Analog-DigitalConverter) Turning On the Analog-DigitalConverter Audio Dubbing 5.Press the AUDIO DUB. button on the wireless controller 6.Press the PAUSE a button on the wireless controller to begin dubbing 7.Press the STOP 3 button on the wireless controller to stop dubbing Playing Back the Added Sound Transferring Video Recordings to a Computer Transferring Using a USB Cable Windows XP/Hi-SpeedUSB 2.0 Only 1.Install the Canon USB Video Driver supplied with the DV Network Software 2.Connect the power adapter to the camcorder 3.Set the camcorder to PLAY (VCR) mode Inserting and Removing a Memory Card Selecting the Image Quality/Size Changing the Movie Size File Numbers Recording Still Images on a Memory Card Recording a Still Image on a Memory Card While Recording Movies on a Tape Open the menu and select [CAMERA SETUP]. Select [STILL I. REC], set it to 2.While you are recording a movie, press the PHOTO button Recording from a Tape in the Camcorder 1. Play back the tape 2. Press the PHOTO button halfway when the scene you wish to record appears Recording from Other Video Devices 2.Connected device: Load a recorded cassette and play back the tape Screen Displays during Still Image Recording q Still Image Quality w Remaining Card Capacity for w Still Images “e” Card Access Display Using the Flash Page Reviewing a Still Image Right after Recording Recording Movies on a Memory Card 3.Press the start/stop button when the scene you wish to record appears 4.Press the start/stop button to stop recording Screen Displays during Movie Recording q Card Access Display r Remaining Card Capacity for Selecting the Focusing Point Selecting the Drive Mode Auto Exposure Bracketing Press the PHOTO button Recording Panoramic Images (Stitch Assist Mode) 5.Record the second image so that it overlaps a portion of the first image 6.Press the button after the last image Playing Back a Memory Card Slide Show 1. Press the SLIDE SHOW button 2. Press the SLIDE SHOW button to stop the slide show Index Screen 1. Move the zoom lever toward W Card Jump Function Press and hold the CARD + or CARD – button Protecting Images Erasing Images Combining Images (Card Mix) Card Chroma Key (CARD CHROMA) Card Luminance Key (CARD LUMI.) Camera Chroma Key (CAM. CHROMA) Card Animation (C. ANIMATION) 5.Select the mix type matching the sample image you have selected 6.To adjust the mix level, select [MIX LEVEL] and adjust it with the SET dial 7.Close the menu 8.Press the CARD MIX button Sample Images Camera Chroma Key Card Animation Formatting a Memory Card Creating a Start-upImage Printing Still Images Printing with the (Print/Share) Button 1.Select the still image you wish to print with the CARD +/– button 2.Press the (print/share) button Printing after Selecting the Print Settings 1. Press the SET dial 2.Select the print settings (125) 3.Turn the SET dial to select [PRINT] and press the SET dial Selecting the Print Settings Paper Settings Including the Date in the Print Setting the Print Effect (Image Optimise) 2. Turn the SET dial to select a setting and press the SET dial 2.Make sure that (PAPER) is selected and press the SET dial 3.Turn the SET dial to select the paper size and press the SET dial 4.Turn the SET dial to select (BORDERS) and press the SET dial 5.Turn the SET dial to select a borders option and press the SET dial [STYLE] and press the SET dial Selecting the Image Style Selecting the Borders Including the Date Trimming Settings Printing with Print Order Settings Erasing All Print Orders 2.Select [PRINT ORDERS ALL ERASE] 3.Select [YES] Printing 1.Connect the printer to the camcorder (122) Transferring Memory Card Images to a Computer Selecting the USB Connection Mode Direct Transfer Windows OS Only Transferring All Images, New Images or Images with Transfer Orders 1.Turn the SET dial to select [ALL IMAGES], [NEW IMAGES] or [TRANSFER ORDERS] 2.Press the button Transferring a Selected Image 1.Turn the SET dial to select [SELECT & TRANSFER] Page Selecting Images for Transfer (Transfer Order) About the NETWORK Mode Screen Displays Screen Displays during Recording/Playback CAMERA Mode (see also 23) PLAY (VCR) Mode CARD CAMERA Mode (see also 100) CARD PLAY Mode List of Messages Direct Print Related Messages Page Maintenance/Others Video Heads Condensation Condensation may form in the following cases: How to avoid condensation: When condensation is detected: Resuming use: Battery Pack Handling Precautions About the battery terminal cover Cassette Handling Precautions Protecting Tapes from Accidental Erasure Memory Card Handling Precautions Using the Camcorder Abroad Power Sources Playback on a TV Screen Troubleshooting Recording Playback Memory Card Operation Printing System Diagram Optional Accessories TL-H30.5 Tele-converter WD-H30.5 Wide-converter FS-30.5UFilter Set SA-1Adapter Bracket VL-10LiBattery Video Light WS-20Wrist Strap Shoulder Strap SC-2000Soft Carrying Case Specifications CA-570Compact Power Adapter NB-2LHBattery Pack SDC-8MSD Memory Card Index