Transferring Video Recordings to a Computer

 

 

Transferring Using a DV Cable

 

 

E

 

You can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal or

 

 

 

 

 

IEEE1394 capture board. Use the editing software supplied with your

 

 

computer/capture board to transfer video recording from tape to computer. Refer to

 

 

the instruction manual of the software. A driver is preinstalled on Windows operating

 

 

systems later than Windows 98 Second Edition and Mac operating systems later than

 

 

Mac OS 9, and will be installed automatically.

 

 

Use the optional CV-150F (4 pin–4 pin) or CV-250F (4 pin–6 pin) DV Cable.

 

 

IEEE1394 (DV) terminal

DV Cable (optional)

6-pin

4-pin

❍Operation may not work correctly depending on the software and the specifications/settings of your computer.

❍If the computer freezes while you have connected the camcorder, disconnect and reconnect the DV cable. If the problem persists, disconnect the interface cable, turn off camcorder and computer, turn camcorder and computer back on and reconnect them.

❍Make sure that camcorder and computer are not connected with a USB cable before connecting the camcorder to the computer using the DV cable. Otherwise, the computer may not operate properly.

❍We recommend powering the camcorder from a household power source while it is connected to the computer.

❍Refer also to the instruction manual of the computer.

Editing

91