❍The audio level can be changed when the green bar is displayed. We recommend hiding the bar when you have finished adjusting to prevent accidental changes.

❍The microphone level resets to [AUTO] when you switch the program selector to [.

❍We recommend using headphones when manually adjusting the audio level.

Microphone Attenuator

Use the microphone attenuator if you need to lower the volume level or correct audio

distortion during recording or audio dubbing. Check the audio level with headphones.

CAMERA

PLAY (VCR) *

CARD CAMERA

CARD PLAY

*Only when [AUDIO DUB.] is set to [MIC IN].

AUDIO SETUP

MIC ATT••••••OFF

(

35)

Open the menu and select [AUDIO SETUP]. Select [MIC ATT], set it to [ON] and close the menu.

Using Headphones during Recording

The headphones terminal also serves as AV terminal. Headphones can only be used when “H” is displayed on the screen. If not, change the setting following the

procedure below.

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

VCR SETUP

 

AV/PHONES

••AV

(

35)

Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to [PHONES H ] and close the menu.

Adjusting the Headphone Volume

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

AUDIO SETUP

HVOLUME•••••

 

(

35)

Open the menu and select [AUDIO SETUP]. Select [ H VOLUME], adjust the volume with the SET dial and close the menu.

You can turn off the volume completely by turning the SET dial down until [OFF] appears.

Turn the SET dial up to increase the volume again.

60