Transferring Using a USB CableWindows XP/Hi-Speed USB 2.0 Only

Use a video editing software to transfer video recordings from the tape to the computer, edit them and upload them from the computer to the tape. You can also convert analog signals to digital signals and transfer them to the computer. For details, refer to the DV Network Software Instruction Manual.

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY

1.Install the Canon USB Video Driver supplied with the DV Network Software.

See Installing Only the Canon USB Video Driver in the DV Network Software Instruction Manual.

2.Connect the power adapter to the camcorder.3.Set the camcorder to PLAY (VCR) mode.

When transferring video recordings from/to a tape, make sure that “AV \DV” is not displayed. When using the analog-digital converter, make sure that “AV \DV” is

displayed. Change the settings as necessary ( 87).

4.Connect the camcorder to the computer using the USB cable.

Make sure that camcorder and computer are not connected with a DV cable before connecting the camcorder to the computer using the USB cable. Otherwise, the computer may not operate properly.

92