134
Using an Externally Mounted Flash ( Sold Separately)

High-Power Flash HF-DC1

This flash is used to supplement the camera's built-in flash when the

subject is too far away for proper illumination. Use the following

procedures to affix the camera and High-Power Flash to the supporting

bracket.

Please read the instructions accompanying the flash along with this

explanation.

z
When in shooting mode the high-power flash will not fire.
z
The flash charge time will lengthen as th e battery charge gets weaker.
Always set the power/mode switch to [OFF] when you finish using the flash.
zBe careful not to touch the flash window or sensor windows with your
fingers while the flash is in use.
zIn outdoor settings in the daylight, the flash may not detect illumination
from the camera's built-in flash and may not fire.
zThe flash may fire if another flash is being used in close proximity.
z
The flash may not fire if there are no ref lective items in its meteri ng field.
zFor continuous shooting, although the flash fires for the first shot, it
does not fire for subsequent shots.
zIf the battery usage time has considerably diminished, wipe the battery
terminals well with a dry cloth as the terminals may be soiled with oil
from one's skin or other dirt.
zIf the battery is used in cold regions (0 °C /32 °F or lower), you are
recommended to carry a spare lithium battery (CR123A or DL123).
Keep the spare battery warm in your pocket until immediately before
using it, and exchange it frequently with the battery in the flash.
zLeaving it in the flash could lead to the battery leaking and damaging
the flash. Remove the battery from the flash and store it in a dry and
cool location if you will not use it for extended periods.
zFasten the attachment screws securely so that they do not loosen.
Failure to do so may lead to the dropping of the camera and flash
resulting in damage to both.
Tripod Socket
Bracket
(Comes with the flash)