Canon S80 2, 1

36

2Use the or button to select [On] and press the

MENU button.

Settings can be made by turning the multi control dial.

Using the Self-timer

1Press button.

The current setting is displayed.

zPressing the button cycles between

settings.

zYou can switch between the (10 sec.), (2 sec.) and

(CustomTimer) option s with the [Self timer] option in the [ (Rec.)]

menu (p.27).

zWhen the self-timer is set to , the shutter activates 10 seconds after,

and when the self-timer is set to , the shutter activates 2 seconds

after, the shutter button is pressed fully. With the option, the specified

number of shots are taken after the specified delay.

* May not be displayed, depending on mode.

When shooting with a high ISO speed and using the built-in flash,

there is more of a chance of overexposure the closer you are to the

subject.



The fastest shutter speed for flash synchronization is 1/250 second.

The camera automatically resets the shutter speed to 1/250 second if

a faster speed is selected.



When shooting with [Slow Synchro] set to [On], camera shake may

become a factor. Use of a tripod is recommended.



In the case of My Colors, , , , and , the flash mode

setting is not canceled even when the camera is turned off.

Mode Dial

*

Contents

Main About This Guide Contents Page Page Please Read Test Shots Warning Against Copyright Infringement Warranty Limitations Safety Precautions Warnings About the Memory Card Page 7 Cautions Caution about magnetic fields 8 Preventing Malfunctions Avoid Strong Magnetic Fields Avoid Condensation Related Problems Page Components Guide Attaching the Wrist Strap Attach the strap as illustrated. Avoid waving the camera about or catc hing it on other items when suspending it from the strap. Basic Operations Operation Panel bc d a r e 13 Mode Dial Using the Multi Control Dial Using the Viewfinder 15 Using the LCD Monitor Press the DISP. button. Pressing the DISP. button switches the display mode. Shooting Mode Press the DISP. button. LCD Monitor Brightness Changing the brightness of the LCD monitor The brightness of the LCD monitor can be changed in the following two ways. 17 Preparing the Camera Shooting Information (Shooting Mode) Playback Information- Mode Playback Information-Detailed (Playback Mode) The following information may also be displayed with some images. Histogram Function 1 the or button to select [On]. 2 21 Changing the Review Duration 1 the or button to select the duration setting. 2 Power Saving Function 1 2 4 Formatting a Memory Card 1 up)] menu, then press the FUNC./SET button. 2 3 Setting the World Clock 1 up)] menu and press the FUNC./ SET button. 2 3 4 1 2 Menu List Configure various convenient shooting and playback functions. FUNC. Menu Rec. Menu Play Menu Set up Menu Page My Camera Menu Resetting Settings to Their Default Values 1 2 Changing Resolution/Compression Settings Movies Still Images 1 4 Setting the Red-eye Reduction Function 1 2 Setting the Slow Synchro 1 2 MENU button. Using the Self-timer 1 2 displayed and shoot the image. Changing the Delay Time and Number of Shots (Custom Timer) You can set the self-timer delay and number of shots to be taken. 1 2 3 Using the Digital Zoom 1 [On] with the or button, then press the MENU 2 and shoot the image. 40 1 2 3 To Cancel Continuous Shooting Shooting a Movie The following four movie modes are available. Turn the mode dial to . 2 3 4 5 43 Continued on next page>> Page Page 46 Framing a Subject Shooting Images can be shot in five sequences in Stitch Assist mode. 1 2 3 4 5 6 Using the Mode Dial (Creative Zone) 1 2 you wish to use and shoot the image. 50 Program AE Differences between the and Modes. Setting the Shutter Speed 51 Shutter Speed Display Setting the Aperture 52 Aperture Setting Display Manually Setting the Shutter Speed and Aperture Shooting in a My Colors Mode 54 1 Film)* with the or button, then select the desired My Colors mode with the or button. Changing the Save Method for the Original Image 1 [Save Original]. Use the or button to select [On] or [Off] and press the MENU button. Shooting in the Color Accent Mode Colors other than the color specified in the LCD monitor are shot in black and white. 1 3 Shooting in the Color Swap Mode This mode allows you to transform a color specified in the LCD monitor into another. 1 2 3 1 2 3 Registering Settings to the Shortcut Button Registering a Function 1 the [ (Rec.)] menu and press the 2 the function you wish to register and press the FUNC./SET button. Using the Shortcut Button 1 Selecting an AF Frame 2 3 1 2 Shooting Problem Subjects for the Autofocus The autofocus may not work well on the following types of subjects. Shooting with the Focus Lock 1 distance as the main subject is centered in the AF frame displayed on the LCD monitor. 2 3 1 2 3 64 Shooting in Manual Focus Mode The focus can be manually set. 1 2 camera. 3 Locking the Exposure Setting (AE Lock) 1 2 3 Locking the Flash Exposure Setti ng (FE Lock) 1 3 4 Switching between Metering Modes 1 metering method with the or button. 2 [Spot AE Point]. 3 [Center] or [AF Point], then press Adjusting the Exposure 1 the multi control dial to adjust the exposure. Adjusting the Tone (White Balance) Select * (Auto) from the FUNC. menu and select the desired white balance with the or button. 71 Setting a Custom White Balance Continued on next page>> 2 paper, cloth or gray card and press The white balance cannot be adjusted when the photo effect is set to (Sepia) or (B/W) (p.72). Changing the Photo Effect *1 1 FUNC. menu and select the desired photo effect with the or The white balance cannot be set when (Sepia) or (B/W) mode is selected. Changing the ISO Speed Auto Exposure Bracketing (AEB Mode) 1 *(BKT-OFF). 2 (AEB), press the MENU button and adjust the compensation range with the or button. Focus Bracketing (Focus-BKT Mode) 1 2 3 Switching between Built-in Flash Adjustment Settings Setting the Flash Adjustment/Flash Output 1 [(Rec.)] menu. 2 1 from the FUNC. menu. 2 flash intensity. Switching the Timing at which the Flash Fi res 1 (Rec.)] menu. 2 curtain]. Shooting Images at Set Intervals (Inter valometer) 1 2 3 5 Saving Custom Settings 1 2 4 3 83 1 mode, then select [Auto Rotate] in the [ (Set up)] menu. 2 MENU button. 84 1 [File Numbering]. 2 Reset] and press the MENU button. Page 86 Create a save destination (folder) 1 (Set up)] menu and press the 2 3 Magnifying Images 2 Viewing Images in Sets of Nine (Index Playback) 3 4 The display jumps nine images at a time 1 2 3 Jumping to Images 1 2 , , , or button, and press the or button. Triple Image Scrolling Display 1 Rotating Images in the Display 2 Applying Effects and Playing Back 1 (Playback)] menu. 2 94 Viewing/Editing Movies 1 Playback mode and press the FUNC./SET 2 one of the following operations, then press the FUNC./SET button. 95 3 or button to select (Cut Beginning) or (Cut End) from the movie editing panel. 4 5 6 97 Attaching Sound Memos to Images 1 2 (Record) and press the FUNC./ SET button. Page Automated Playback (Slide Shows) 3 100 4 5 button and select All Images. Select images for the Slide Show 1 2 or (Custom 3) with the or button and press the FUNC./SET 3 1 2 3 1 2 3 Protecting Images 1 2 Erasing All Images 1 2 106 About Printing Images shot with this camera can be printed using one of the following methods. Setting the DPOF Print Settings 1 2 3 Setting the Print Style The following print settings can be selected. 1 2 Image Transmission Settings (DPOF Transfer Order) 3 Viewing Images on a TV Set 1 3 4 5 Customizing the Camera (My Camera Settings) 1 2 3 1 2 3 4 115 5 Data that can be Registered as My Camera Settings Start-up Sound: 1 sec. Operation Sound: 0.3 sec. Self-timer Sound: 2 sec. Shutter Sound: 0.3 sec. Page 117 Troubleshooting Camera will not operate. Camera will not record. Cannot play back. 118 Lens will not retract. Batteries consumed quickly. Battery pack does not charge. Sounds come from the camera interior. 119 Image is blurred or out of focus. Subject in recorded image is too dark. 120 Subject in recorded image is too bright. A bar of light (red, purple) appears on the LCD monitor. Noise displays on the LCD monitor. Subject's movements on LCD mon itor are irregular. 121 White dots appear on the image. Flash does not fire. Image not showing on TV monitor. Zoom does not operate. List of Messages Page Page Battery Handling Battery Status Indications The following icons or messages indicate the battery status on the LCD monitor. Battery Handling Precaution Page 127 Handling the Memory Card Write Protect Tab Cautions When Handling Using the AC Adapter Kit (Sold Separately) 1 2 3 4 cable, then close the memory card slot/battery cover. Car Battery Charger (Sold Separately) 1 Using Conversion Lenses (Sold Separately) 1 2 b Warning a c 3 4 Page Using an Externally Mounted Flash ( Sold Separately) High-Power Flash HF-DC1 Camera Care and Maintenance Specifications All data is based on Canon's standard testing methods. Subject to change without notice. PowerShot S80 Page Page 139 Battery Performance 140 Memory Cards and Estimated Capacities (Recordable Images) Movies : Card included with the camera Still images : Card included with the camera 141 Image File Sizes (Estimated) Still images Movies SD Memory Card Battery Pack NB-2LH Battery Charger CB-2LW/CB-2LWE Compact Power Adapter CA-PS700 Car Battery Charger CBC-NB2 (sold separately) (Included with the separately sold AC Adapter Kit ACK-DC20) Wide Converter WC-DC10 (Sold Separately) Conversion Lens Adapter LA-DC20 (sold separately) Tele-converter TC-DC10 (sold separately) Photo Tips and Information Regarding the AF Frame (p. 60) Advanced Techniques for the Macro Mode (Basic) Tip for Using the Self-timer (p. 36) Exposure Compensation (p. 69) ISO Speed (p. 74) INDEX Page Page Page Functions Available in Each Shooting Mode