Changing Shooting Function Settings

Displaying the Overlay

You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for postcard size prints.

Choose [Disp. Overlay], then press the qr buttons to choose an option.

Grid Lines

A grid overlays the display.

 

 

 

Gray bars will appear on the top

3:2 Guide

and bottom of the display. This

area will not print when printing

 

 

on paper with a 3:2 aspect ratio.

Both

Both grid lines, and the 3:2 guide

will appear.

 

In mode, you cannot set [3:2 Guide] or [Both].

Grid Lines will not be recorded on the image.

The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas.

Changing the IS-Mode Settings

Choose [IS Mode], then press the qr buttons to choose an option.

Image stabilization is always on.

You can confirm the result Continuous directly on the display, which

makes it easier to check the composition or focus.

Shoot Only

Image stabilization is only active

at the moment of shooting.

 

 

Image stabilization only counters

Panning

up and down motion. This option

is recommended for shooting

 

 

objects moving horizontally.

If camera shake is too strong, attach the camera to a tripod. You should set the IS Mode to [Off] when the camera is attached to a tripod.

When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically.

119