Using the Face Self-Timer

To take a photo that includes the photographer, such as a group photo, compose the shot, and press the shutter button. The camera will shoot two seconds after you enter the shot and it detects your face (p. 78).

Choose .

Follow Steps 1 – 3 on p. 54 and choose .

Compose the shot and press the shutter button halfway.

Make sure a green frame appears on the face focused on and white frames appear on other faces.

Press the shutter button fully.

XThe camera will enter shooting stand-by, and [Look straight at camera to start count down] will appear on the screen.

XThe lamp will blink and the self-timer sound will play.

Join the subjects and look at the camera.

XWhen the camera detects a new face, the lamp and sound will speed up (the lamp remains lit when the flash will fire), and two seconds later the shutter will release.

To cancel the countdown after the timer has started, press the p button.

Changing the number of shots

For the screen in Step 1, press the l button, then press the qr buttons to change the number of shots. Press the m button to accept the setting.

Even if your face is not detected after joining the subjects, the shutter will release approximately 15 seconds later.