Changing Shooting Functions
Changing the IS-Mode Settings
●Choose [IS Mode], then press the qr buttons to choose an option.
| Image stabilization is always on. You | |
Continuous | can confirm the result directly on the | |
display, which makes it easier to check | ||
| the composition or focus. | |
|
| |
Shoot Only | Image stabilization is only active at the | |
moment of shooting. | ||
| ||
|
| |
| Image stabilization only counters up | |
Panning | and down motion. This option is | |
recommended for shooting objects | ||
| ||
| moving horizontally. | |
|
|
•If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is attached to a tripod.
•When using [Panning], hold the camera horizontally. Image stabilization does not work when the camera is held vertically.
Registering Functions to the 
Button
●Choose [Set Shortcut button], then press the m button.
●Press the opqr buttons or turn the  dial
to choose the functions to register, then press the m button.
●Pressing the 
button will call up the registered function.
