Changing the Start-up Image or Sound

In the 3tab, you can set one of your recorded images as the start-up image when the camera power is turned on, or change the sounds played for each camera operation with your recorded sounds. However, when starting the camera with the viewfinder display, the start-up image will not display, and there will be no start-up sound.

Change Sounds

Choose [Sound Options], then press the m button.

Press the op buttons or turn the  dial to choose an option.

Press the qr buttons to choose a setting.

1Preset sounds.

2You can register your sounds using the supplied software (p. 153).

Changing the Start-up Screen

Choose [Start-up Image], then press the m button.

Press the qr buttons to choose a setting.

No start-up image.

1Preset images.

2You can register your images.

Registering the Start-up Screen

When you press the 1 button and set the camera to Playback mode, you can register sounds and images.

Choose [Start-up Image], then press the m button.

Press the qr buttons to choose [2], then press the m button.

152

Page 152
Image 152
Canon SX20 IS manual Changing the Start-up Image or Sound, Change Sounds, Changing the Start-up Screen, 152