152, Memory Card Caution Phrases | Canon XM2 PAL specification

E

	COPYRIGHT PROTECTED	You attempted to copy a copyright protected tape. May also
		be displayed when an anomalous signal is sent during Analog
	DUBBING RESTRICTED
		Line-in recording (		98, 99).

Memory Card Caution Phrases

NO CARD

THE CARD IS SET FOR ERASURE PREVENTION

NO TITLES

NO IMAGES

CARD ERROR

Memory card not inserted into the camcorder ( 113).

The SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch ( 112).

No title image is recorded on the memory card.

No images are recorded on the memory card ( 116).

A memory card error occurred. The camcorder cannot record/play back. The error may be temporary. If CARD ERROR disappears after 4 seconds and flashes red, turn the camcorder’s power off, remove the card and reinsert the card. If changes to green, you can continue recording/playback ( 116, 118).

Additional

Information

152

CARD FULL

NAMING ERROR

UNIDENTIFIABLE IMAGE

PRINT MARK ERROR

IN CARD POSITION

MEMORY CARD COVER

IS OPEN

No free space remaining on the memory card. Replace with another memory card or erase images ( 125).

File or folder numbers have already reached the maximum value ( 115).

The image is recorded in a JPEG format or any format that is not compatible with the camcorder, or the image contains corrupted data.

The marked file cannot be edited ( 123).

Appears when you press the start/stop button in CARD CAMERA mode to inform you that no image has been recorded.

The cover of the memory card compartment is open.

Image 152

Canon XM2 PAL instruction manual 152, Memory Card Caution Phrases

Contents

Digital Video Camcorder Important Usage Instructions For Users in the UK Operating Steps and Reference Guide Contents Attaching the Ferrite Cores Additional Information Symbols Used in This Manual Thank You For Choosing a Canon Introducing the XM2 Finding Your Way Around the XM2 Preparations Preparations White Balance Zoom Adjusting the Viewfinder Preparing the CamcorderAttaching the Lens Hood Remove the lens cap Attaching the Large Eye Cup Adjusting the Grip BeltAttaching the Shoulder Strap Powering the Camcorder Using a Household Power Source Remove the battery pack after use Charging and Attaching the Battery PackAttach the battery pack to the power adapter Load or unload the cassette Loading a CassetteLoading and Unloading Cassette Memory Function Cassette Handling PrecautionsProtecting Tapes from Accidental Erasure Using the Menus Play Menu Press the Menu button Selecting From the MenusPress the Select dial List of Menus CAM. Menu VCR Set Up Submenu Display Set Up SubmenuSystem Submenu Custom Key Submenu VCR Menu Title Mix Submenu System Submenu 8Wireless Controller @2Setting Date and TimeCamera set up Submenu 9Tally Lamp Custom Preset Submenu Card Set Up Submenu Custom Key Submenu #2Custom Key #3ReturnCard Operation Submenu Single Image Display Card Operation Submenu Index Screen Display 0Recording Mode 1Return Using the Wireless Controller/Tally Lamp Inserting Batteries When Operating 2 Canon DV Camcorders Remote Sensor Mode If your wireless controller is not working Turning Off the Tally Lamp Press the Menu button Setting the Date and TimeSetting the Time Zone/Daylight Saving Time London Setting the Clock Date and Time Display Turn the program selector to Easy Recording mode Basic RecordingBefore You Start Recording Press the start/stop button to begin recording Power Save Function When You Have Finished RecordingUsing the Standby lever Changing the Recording Mode SP/LP Wide-Screen TV Recording Turning the Camcorder Recording Displays ON/OFF Demonstration Mode Confirmation/Warning beeps Using a Tripod Tips for Making Better VideosHolding the Camcorder Sound Recording Camcorder Moves CompositionPicture Angle 40⋅ /100⋅ Digital Zoom Zooming20⋅ Optical Zoom Changing the Angle of the LCD Screen Using the LCD ScreenOpening the LCD Screen About the LCD Screen Adjusting the Brightness of the DisplayAllowing the Subject to Monitor Recording On the Viewfinder Turning the Optical Image Stabilizer Off Using the ND Filter Recording Still Images onto a Tape Press the Photo button halfway down and hold it Press the Photo button fully down to take the still image Selecting the Movie Mode Normal/Frame Record Review Searching and Reviewing While RecordingRecord Search Using the Various Recording Programs Availability of Functions in Each Recording Program Auto Setting the Program AE ModeEasy Recording Shutter Speeds Giving Priority to Shutter Speed Shutter-Priority TvGiving Priority to the Aperture Aperture-Priority Av Spotlight ManualSand & Snow Selecting the Built-in Microphone Sound Selecting the Audio ModeAudio Recording Adjusting the Audio Recording Level Audio level indicator at the side of the camcorderAudio level indicator on the LCD or viewfinder screen Microphone Attenuator Default settings Using the Custom KeyChanging the Custom Keys Setting While in record mode Operating the Cstm KEY Button TV Screen Microphone Audio Level Indicator Wipe Using Digital EffectsFade Trigger Overlap Operating the Fade Trigger Operating Wipe and Overlap Press the D.EFFECTS/BARS ON/OFF button during recordingDuring recording Press the start/stop button Press the start /stop button Black and White BLK & WHT SepiaArt Mirror Operating the Effects Select Effect and press the Select dial Using the Colour Bars Activating the Colour BarsPress the D. EFFECTS/BARS Select button Select Color Bars and press the Select dial Using a Canon Speedlite for Flash Photography Optional Turn the power of the Speedlite onAttaching the Speedlite Operating the Speedlite Open the CAM. SET UP submenu and select a Interval Default settingSelect Interval T. and set it to on Select Interval and set the interval Pausing the Interval Recording Recording with the Self-Timer Press the start/stop button to end recording Using the DV Control When the XM2 is Recording Using the VL-3 Video Light Optional Set the microphone’s directivity switch Using the DM-50 Microphone OptionalSet the camcorder to Tape Camera mode Using the MA-300 Microphone Adapter Optional Attaching the Microphone Adapter to the CamcorderAttaching the Microphone Tighten the shoe lock in the direction of the arrow Pull the EXP dial up or down to open or close the iris Adjusting the Exposure ManuallySet the recording program to Manual Press the EXP dial About the Gain About the Shutter SpeedsAbout the Iris Exposure lock Exposure Lock/AdjustmentExposure adjustment Adjusting the Focus Manually Rotate the focusing ring to adjustFocus Use the zoom lever to reframe the subject Setting the White Balance For setting the white balance manually Recording Using AE Shift Using the Custom Preset Setting the Custom Preset FunctionsAdjusting the Colour Gain Adjusting the Colour Phase Turn the program selector to Q Press the Cstm Preset button Adjusting the Setup LevelActivating the Custom Preset Functions Activating the Zebra Pattern Using the Zebra PatternSelecting the Zebra Pattern Level Recording PC Screens and Other Screens Using Clear Scan Recording the Display Information Playing Back a Tape Load the cassette Press the e play button to start playback Slow Reverse Playback Other Playback ModesSpecial Playback Built-in Speaker and Headphone Terminal Displaying Date, Time and Camcorder Data Data Code Selecting Date/Time Setting the Data Code Date & Time Six-second Auto Date Searching the Tape Photo Search/Date Search/Index Search Returning to a Pre-Marked Position Zero Set Memory If Your TV or VCR Has an S-video Input Terminal Connections for Playback on a TV ScreenIf your TV or VCR has a Scart terminal without S S1-video If Your TV or VCR Has Audio/Video Input Terminals Prepare the TV and VCR Editing to a VCRConnect the camcorder to the VCR Lanc terminal Dubbing to/from a Tape with Digital Video Equipment Connect the camcorder and the other digital devicePrepare the other device Load a blank cassette Copyright precaution Copyright signalsDubbing Concerning Copyrighting Recording from a VCR, TV or Analog Camcorder Analog Line-in 100 101 Turning the Analog-Digital Converter On 102 Recording Over Existing Scenes AV Insert Editing 103 Slide the TAPE/CARD switch to Tape 104Tape in the camcorder Playback tape 105 Press the AV Insert buttonTo stop inserting, press the Stop button on the camcorder Stop playback on the VCR Audio Dubbing 106To connect other audio devices To connect an external microphone 107 Press Audio DUB Adjust the input signal level 108 Select the output channel Setting the Audio Mix109 Playback Sound Selecting Audio Output Channels110 Connecting to a PC Using a DV Cable 111 Memory Card Introduction You can do the following with a memory card Turn the Power switch to OFF Inserting and Removing the Memory CardSelecting the Image Quality 113 114 Card Access DisplaySelecting the Image Size 115 File NumbersTurning Off the Shutter Sound Press the Photo button halfway and hold it Recording Still Images onto a Memory Card116 117 Memory Card Indication Playing Back a Memory Card 118 Card Jump Function Slide Show119 To stop the slide show, press the MIX/SLIDE Show button Settings of the Still Images Recorded on a Memory Card 120Preventing Accidental Erasure Protect Marking a Still Image for Printing Print Mark File Operation File Oper 121 Preventing Accidental Erasure Protect Protecting an Image While Viewing an Index Screen122 Select \ Protect Press the Select dial Marking a Still Image for Printing Print Mark 123 Select YES Erasing all Print Marks124 Erasing Still Images 125Select the still image you wish to erase Open the menu and select Card Oper Select Image Erase 126 Select ALL 127 Combining Images and Recording Them onto a Tape Title MixCreating a Title Image Selecting a Title Image Activating the Title MixProtecting a Title Image 128 Select YES and press the Select dial Erasing a Title Image129 Copying Still Images from Memory Card to Tape 130Open the menu and select Card Oper Select Copy Select Execute Open the menu and select Card Oper Select Format Formatting a Memory Card131 Connecting to a PC Using a USB Cable 132 133 Other Information and PrecautionsMemory Card Operating Precautions Battery Max. Recording Time Typical Recording Time Pack Charging and Recording Times How Much Power Is Left? When to RechargeTaking Care of the Battery Pack 135 136 Installing the Backup BatteryTreat the battery pack with care Maintenance 137 Maintenance Storage138 Viewfinder Using the Camcorder Abroad Power sources139 Video heads What happens when condensation is detected Condensation140 Protecting the camcorder from condensation 141 TroubleshootingRecording/Playback 142 ? There is no sound coming from the speaker during playback Memory Card Operations 143 Miscellaneous 144 XM2 System Diagram Availability differs from area to area 145 Optional Accessories 146 VL-10Li Battery Video Light 147220EX/420EX/550EX Speedlite MA-300 Microphone Adapter Screen Displays TV Screen DisplaysTurning Off the LCD Screen Displays 148 149 Screen Displays in Tape Camera ModeScreen Displays in Tape Play VCR Mode 150 Screen Displays in Card Camera ModeScreen Displays in Card Play VCR Mode 151 152 Memory Card Caution Phrases Specifications 153 154 CA-920 Compact Power AdapterBP-915 Battery Pack Index 155 156 157 Camcorder Setting Function SubmenuMenu at a Glance 158 Canon INC