Preparations
Turn the camcorder’s POWER switch to PLAY (VCR) and move the camcorder’s TAPE/CARD switch to TAPE. Load a recorded cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed position).
E
Dubbing
/
ZERO SET | SEARCH |
|
|
MEMORY | SELECT |
|
|
AUDIO | REW | PLAY | FF |
DUB. | |||
AV | STOP | + / | |
INSERT | |||
REMOTE SET PAUSE | SLOW | ⋅ 2 |
AUDIO
REC LEVEL
A M
Do not connect/disconnect any cables to/from the camcorder when dubbing audio or preparing to dub audio.
+ PLAY
TAPE (VCR)
VCR SET UP | AUDIO DUB.••• AUDIO IN |
( 18)
1.Open the menu and select VCR SET UP.
2.Select AUDIO DUB.
3.Select AUDIO IN or MIC. IN and close the menu.
4.Locate the point where you wish to start audio dubbing, then press the e/a button or the PAUSE button.
•You can use the playback buttons on the camcorder or the special playback functions on the wireless controller in the same way as in playback mode.
•The camcorder becomes set to playback pause mode.
5.Press AUDIO DUB.
•AUDIO DUB. and 2a appear on the display.
Editing