Troubleshooting
Refer to this checklist first if you have any problems with your camcorder. Possible explanations are given for each problem on the list — turn to the page numbers in parentheses for more information.
Make sure that the camcorder is properly connected if you are using it with a TV or VCR. Consult your dealer or service outlet if problems persist.
E
Recording/Playback
Problem
?Nothing happens when I press the buttons.
?The camcorder turned itself off.
?The cassette compartment stopped mid- operation while loading/unloading a cassette.
?The start/stop button does not work.
?There is no picture in the display.
?There is a blank blue screen in the display.
?The camcorder does not focus.
Cause and/or what to do about it
•The camcorder is not set to the appropriate mode ( 
33, 85).
•The cassette is not loaded or is set for erasure prevention ( 
•The cassette has reached the end.
•The power source is not properly connected, or the battery pack is exhausted or not properly attached ( 
•The function cannot be used in that recording program ( 
50).
•The camcorder was in record pause mode for more than about 5 minutes ( 
34, 116).
•The battery pack is exhausted ( 
15, 135).
•The battery pack’s power is exhausted. Recharge or change to a new battery pack ( 
15).
•The cassette is not loaded or is set for erasure prevention ( 
•The cassette has reached the end.
•The camcorder is not set to the appropriate mode ( 
33, 85).
•You are attempting to play back or record copyright protected material ( 
98).
•The video heads are badly contaminated ( 
139).
•The camcorder is on manual focus ( 
77).
•The viewfinder lens needs adjusting ( 
12).
•The lens is dirty ( 
138).
Information | Additional |
