E
Miscellaneous
Problem
?The wireless controller does not work.
Cause and/or what to do about it
•The remote sensor mode is set to OFFB in the menu ( 
28).
•The remote sensor modes of the wireless controller and the camcorder itself are different ( 
28).
•The batteries are dead or not inserted.
? The power indicator is flashing. | • Check the screen displays ( |
| 135). |
|
?There are air bubbles inside the lens. • This is unlikely, but may happen if you use the camcorder in places where the air pressure is low, in an airplane for example. The bubbles will disappear a week or so after you return the camcorder to normal atmospheric pressure.
?The camcorder malfunctions.• External interference may cause the camcorder’s microprocessor to malfunction temporarily. If random letters appear in the display or if normal operation is interrupted, remove and then replace the power source.
?The DV cable is connected correctly, but there’s nothing in the display.
?The camcorder becomes warm during use.
•Remove the cable and then reconnect it or turn the power off and back on again.
•This is not a malfunction.
Additional | Information |
