E

Dubbing

1.Find a point on your recorded cassette slightly before the section you want to copy and set it to playback pause mode.

2.Press the REC PAUSE button on the wireless controller.

The camcorder enters record pause mode.

3.Start playback on the other digital device while you monitor the picture.

4.Press the pause button.

Recording starts.

5.When you get to the point where you want to stop recording, press the stop button or the pause button.

Recording stops.

6.Stop playback on the other device.

Notes:

Blanks between recordings on the playback tape are recorded as anomalous images on the tape that is being recorded to.

When dubbing to a cassette with digital video equipment, be sure to set AV \ DV OUT to OFF in the menu.

Editing

Copyright signal

Certain pre-recorded software tapes are copyright protected. If you try to play back such a cassette, “COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED” appears in the display for a few seconds and then the camcorder displays a blank blue screen; you cannot view the contents of the cassette.

If you try to record from such a tape via the digital cable “COPYRIGHT PROTECTED DUBBING RESTRICTED” appears in the display; you cannot record the contents of the tape.

78

Page 78
Image 78
Canon ZR40 instruction manual Dubbing, Stop playback on the other device, Copyright signal