EdgeFLEX 600 Installation

Connecting System Cables

Connecting the Local Console Cable

To connect a local console cable (included in the Accessory Kit) to the RS-232 serial connector on the EdgeFLEX 600, perform the following steps:

1.Locate the local console cable to use as the local connection for network management.

2.Connect the cable to the mini RS-232 port labeled COM 1 on the front of the chassis.

Connecting the Timing Input Cable

The EdgeFLEX 600 provides two timing inputs, supporting RJ-48C form-factor connectors. To connect a cable to the timing connector on the EdgeFLEX 600, perform the following steps:

1.Locate the cable from the external timing source.

2.Insert the cable’s RJ-48C connector into the port labeled TIMING IN 1 on the front of the EdgeFLEX 600.

3.(optional) If a secondary timing source is available, connect it to the port labeled TIMING IN 2 on the front of the EdgeFLEX 600.

Connecting the Timing Output Cable

The EdgeFLEX 600 provides two timing outputs, OUT 1 and OUT 2 adjacent to the timing inputs. The OUT ports may be used to pass the timing signal received by the EdgeFLEX 600 to another device.

The OUT ports provide a pass through of the timing signal when the EdgeFLEX 600 is powered off. When the EdgeFLEX 600 is powered, the timing OUT 1 port is synchronized to the timing signal received on timing port IN 1. OUT 2 is connected to IN 2 in the same manner.

Connecting the Alarm Contacts

The EdgeFLEX 600 is equipped with four voltage sense inputs (range 5 to 75Vdc) for detecting external circuit closures, and contact outputs (NO/C/NC) for Critical, Major, Minor, Audible and Visible alarms. Refer to Appendix A for the connector pinouts, and the Management card label for contact location. To connect the alarm contact wiring to the relay connectors, perform the following steps:

1.Remove the alarm terminal blocks from the EdgeFLEX 600 accessory kit.

2.The round holes in the top and bottom rows are the wire insertion points. These holes have a spring-loaded retaining mechanism. To release the retaining mechanism, carefully insert a small probe (such as a small screwdriver) into the square hole directly above or below the desired wire location, then insert the wire into the corresponding round hole. Remove the probe to re-engage the retaining mechanism and lock the wire in place.

Insert the wires from the contact closures into the appropriate locations on the terminal blocks in this fashion until the connections to each block have been made as desired.

EdgeFLEX 600 - Release 2.0

2-11

Page 28 Page 30
Page 29
Image 29
Carrier Access EdgeFLEX, 600 installation manual Connecting the Local Console Cable, Connecting the Timing Input Cable
Page 28 Page 30

600, EdgeFLEX specifications

Carrier Access EdgeFLEX 600 is an advanced solution designed to cater to the growing demands of telecom operators and large enterprises. This versatile platform seamlessly integrates various technologies to provide robust connectivity, enhanced network performance, and operational efficiency. With its cutting-edge features, EdgeFLEX 600 is poised to play a critical role in the evolution of modern communication networks.

One of the standout features of EdgeFLEX 600 is its remarkable scalability. Engineered to support a wide range of applications, the platform can be easily expanded to meet the increasing bandwidth requirements of users. This scalability is particularly crucial for service providers aiming to accommodate the influx of data traffic generated by the rise of IoT devices and high-definition content streaming.

EdgeFLEX 600 is equipped with a powerful multi-service architecture, making it ideal for a variety of deployment scenarios. This architecture allows operators to deliver voice, video, and data services over a single platform, significantly reducing operational costs and simplifying network management. The platform supports various protocols, including Ethernet, MPLS, and SDH, ensuring compatibility with existing infrastructures and facilitating smooth integration.

The user experience is further enhanced by EdgeFLEX 600's advanced Quality of Service (QoS) features. These capabilities enable operators to prioritize critical applications and allocate bandwidth dynamically, ensuring optimal performance under varying network conditions. Furthermore, built-in analytics and monitoring tools provide valuable insights into network performance, enabling proactive troubleshooting and efficient resource management.

Security is also a top priority for EdgeFLEX 600. The platform incorporates robust encryption and authentication protocols to safeguard sensitive data and prevent unauthorized access. This focus on security is essential in an era where cyber threats are increasingly sophisticated and prevalent.

In terms of energy efficiency, EdgeFLEX 600 has been designed with sustainability in mind. Its optimized hardware and software components work together to minimize power consumption, thereby reducing operational costs and the overall environmental footprint of communication networks.

In summary, Carrier Access EdgeFLEX 600 is a cutting-edge solution that addresses the modern challenges faced by telecom operators and enterprises. With its scalable architecture, multi-service capabilities, advanced QoS features, strong security, and energy efficiency, EdgeFLEX 600 is well-equipped to support the next generation of communication networks. As the demand for high-performance connectivity continues to grow, this platform will undoubtedly play a pivotal role in shaping the future of telecommunications.
Top Page Image Contents