6-18 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Voice over IP
Phone Settings
Signaling
Protocol Select the analog signaling mechanism:
Loop Start - Sets the line to Loop Start signaling.
Ground Start - Sets the line to Ground Start signaling.
Note: For the MSR, this field is not selectable. The setting is based
on the cross-connect type info.
Calling Party Disconnect
(CPD)
Enables/disables Calling Party Disconnect capability for this line. If
enabled, causes a timed Open Switching Interval (OSI) to be applied
to the FXS loop when the remote (SIP) party disconnects.
Calling Features
Call Waiting Enables/disables the Call Waiting capability for this line.
Call Waiting Caller ID Enables/disables the Call Waiting Caller ID for this line.
Block Outgoing Caller ID Enables/disables blocking of Caller ID on SIP calls made from this
line.
Authentication
Authentication Select to enable Authentication on the line.
Authentication User ID The User ID to be used when responding to authentication requests.
Default is the User ID of the line.
Authentication Password The password to b e used when responding to authentication requests.
Logging
Per Line Logging Use the checkbox to enable per line logging. Default is unchecked.
Notes Displays information regarding the current tab.
Field Definition (Continued)