2-50 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Advanced
Routing
Configuring OSPF
NOTE: For interface OSPF configuration information, see OSPF Configuration on the
Network Connection on page 3-40.
1. Select Advanced/ Router.
2. Select the OSPF tab.
3. Enable OSPF by checking the Open Shortest Path First (OSPF) checkbox.
4. Set Enable Compatible RFC 1583, if required.
5. Set Router ID as needed.
6. Define the Area ID with the Area number or Area IP Address. Note: 0.0.0.0 is not accepted in
this field.
7. Define the Area as Stub, if required.
8. Define the Area Authentication, as required.
9. Select New Entry.