CV1501
Power Output
•150W mono into 4 ohm and 8 ohm loads, autoformer coupled, 40Hz to 20kHz ±3db with < 0.5% THD at full power
•150W mono transformer coupled @ 25V, 35V, 50V, 70V and 100V 40Hz to 18kHz ±3dB with < 0.5% THD at full power
CV2501
Power Output
•250W mono into 4 ohm and 8 ohm loads, autoformer coupled 40Hz to 20kHz ±3dB with < 0.5% THD at full power
•250W mono transformer coupled @ 25V,
35V, 50V, 70V and 100V, 40Hz to 18kHz ±3dB with < 0.5% THD at full power
Common Features
•Convection Cooling
•5 segment LED level display per channel including signal present and clip indicators
•3 LED display per channel of Power, Protect and Thermal Overload
•Standby LED indicates the amplifier is in Standby Mode
•Data LED (used with Computer Control & Monitoring module)
•Level control can be covered with a snap in cap (supplied) to prevent tampering
•Remote Control of output level via Euro Style connector
•Unbalanced Effects Loop (send/receive) via Euro Style Connector
•Standard Mono Input Module with line level input via Euro Style connector and XLR jack, connected in parallel
•Switched Clip Limiter
•26Hz High Pass Filter
•Switched 80Hz and 120Hz (12db/Octave cut) High Pass Filters
•Terminals for Sequencing Power ON/OFF
•Speaker Output via large gauge Euro Style connectors
•Power Switch, 3 positions On, Off, Standby
•AC Line Cord (Detachable IEC Type)
•Optional Accessories:
−Four Input Mixer Module with zone assignment
−Paging Modules with variable ducking
−Expanded Mic/Line Level Input Module
−Computer Control & Monitoring via iON Media Control Module
−DSP control of 28 Band Graphic EQ, 5 Band Parametric EQ, HP Filter, LP Filter, Crossover, Adjustable Limiting and Adjustable Delay via iON Media DSP Tools Module
Rev 04.08.021 | - 4 – |
