CV1502
Power Output
•150W per channel into 4 ohm and 8 ohm loads, autoformer coupled, 40Hz to 20kHz ±3dB with < 0.5% THD at full power
•150W per channel, transformer coupled @ 25V, 35V, 50V, 70V and 100V, 40Hz to 18kHz ± 3dB with < 0.5% THD at full power
•300W parallel mono at 4 Ohms, 300W parallel and bridged mono at 8 and 16 Ohms, 50V, 70V, 100V, 140V and 200V with no more than 0.5% THD
CV2502
Power Output
•250W per channel into 4 ohm and 8 ohm loads, autoformer coupled, 40Hz to 20kHz ±3dB with < 0.5% THD at full power
•250W per channel, transformer coupled @ 25V, 35V, 50V, 70V and 100V, 40Hz to 18kHz ± 3dB
•500W parallel mono at 4 Ohms, 500W parallel and bridged mono at 8 and 16 Ohms, 50V, 70V, 100V, 140V and 200V with no more than 0.5% THD
Common Features
•Convection Cooling
•
•3 LED display, per channel, of Power, Protect and Thermal Overload
•Standby LED indicates the amplifier is in Standby Mode
•Data LED (used with Computer Control module)
•Level controls can be covered with a cap (supplied) to prevent tampering
•Remote control of output level via Euro Style connector
•Unbalanced Effects Loop (send/receive) via Euro Style Connector
•Standard Dual Input Module with line level inputs via Euro Style connectors and XLR jacks, connected in parallel
•Switched Clip Limiters
Rev 04.08.021 | - 6 – |
•26Hz High Pass Filters
•Switched 80Hz and 120Hz (12db/Octave cut) High Pass Filters
•Terminals for Sequencing Power ON/OFF
•Speaker Outputs via large gauge Euro Style connectors
•Power Switch, 3 positions On, Off, Standby
•AC Line Cord (Detachable IEC Type)
•Optional Accessories:
−Four Input Mixer Module with zone assignment
−Paging Modules with variable ducking
−Expanded Mic/Line Level Input Module
−Computer Control & Monitoring via iON Media Control Module
−DSP control of 28 Band Graphic EQ, 5 Band Parametric EQ, HP Filter, LP Filter, Crossover, Adjustable Limiting and Adjustable Delay via iON Media DSP Tools Module
