Casablanca Fan Company 84GxxD warranty Outside USA Secondary Support Canopy Installation

FOUR SEASONS™ III (OUTSIDE USA INSTALLATION)

OUTSIDE USA - SECONDARY SUPPORT ♦CANOPY INSTALLATION

Step 12. Attach the canopy to the crossbar mounting bracket behind the installed outlet adaptor plate with three of the 8-32 x 21⁄2" long canopy screws and lock washers provided with your Casablanca fan. Hand tighten until snug against the ceiling.

NOTE: On sloped ceilings, align the canopy opening toward the top or peak of the room.

Step 13. Attach the spring lock hook to the fan cable by depressing the spring lock and clipping onto the loop at the end.

FAN

CABLE

SPRING

LOCK

SPRING	FEED OUTLET BOX
LOCK HOOK
	CABLE AND OUTLET
	BOX WIRES
	THROUGH CANOPY
	OPENING	CANOPY
		LOCK
		WASHER
		CANOPY
		SCREW

OUTSIDE USA - SECONDARY SUPPORT ♦HANGING THE FAN

Step 14. To hang the fan body in the canopy, hold the fan body firmly and insert the nylon ball into the canopy opening. Rotate fan body until slot on nylon ball fits into pin opposite canopy opening.

Step 15. Attach the fan wires to the ceiling outlet box wiring by twisting the bare ends of the wiring together:

•White wire from fan to white NEUTRAL wire in ceiling outlet box.

•Black wire and blue wire from fan to black (or red) POWER wire in ceiling outlet box.

•Green leads from crossbar mounting bracket and fan to grounding conductor of power source.

Secure by threading on the wire nuts provided with the fan.

NOTE: SEE PAGE 12 FOR ADDITIONAL WIRING INSTRUCTIONS.

OUTLET	CANOPY
BOX
CABLE

FAN

CABLE

PIN

BALLSLOT

12