INSTALLING DOWNROD
Step 4a. Unscrew and remove both pieces of the control housing cover. Set the control housing cover and six screws aside. You will
Step 4b. Unscrew and remove cross bolt and nut from downrod adapter tube in center of control housing.
Step 4c. Thread black, white, and green wires up through downrod, tightening to the base of the downrod adapter tube in the control housing structure.
Step 4d. Slide downrod into downrod adapter tube making sure no wires are pinched. Place your thumb on the end of the
NOTE: Be careful not to cut or pinch the wires when inserting the
Step 4e. Use the parts you set aside in Step 4a to replace the control housing cover and screw it back into place.
Cross Bolt
and Nut
HANGING THE FAN
NOTE: You will need at least two assistants for this step.
Step 5a. Have your assistant(s) help you lift the Candelier fixture to the ceiling.
Step 5b. Insert the downrod ball into opening in the crossbar hanging bracket.
Step 5c. Slide the hanging bracket support ring up the hanging bracket, and screw it into place using the three
6