HALOGEN BULB INSTALLATION
Step 8a. To install or replace the halogen bulbs, first remove the bulb covers.
•Loosen the round knurled nuts.
•Slide out the plastic halogen bulb covers (both covers are the same part; they fit together).
Step 8b. Carefully remove halogen bulbs from packaging. There are 8 halogen bulbs provided.
Step 8c. Locate the halogen sockets inside the wiring cavities. Plug each halogen bulb into a socket, as shown.
Step 8d. Hold the halogen bulb carefully by the socket. Press the bulb into the bulb casing with gentle pressure.
Step 8e. Reverse instructions in Step 8a to
Halogen Bulb
REMOVING FLICKER BULBS FROM PACKAGING
NOTE: The Candelier flicker bulbs are extremely fragile, and should be handled with care.
Step 9a. Remove any remaining packaging material from the Candelier fixture. Carefully unwrap the plastic packaging from the cardboard case of bulbs. Keep the case on a hard surface, for stability.
Step 9b. Remove each bulb carefully, handling it by the white plastic base, as shown. There are 53 bulbs provided. (Five bulbs are “extra”.)
Step 9c. With the Candelier hanging from the ceiling, install the flicker bulbs. Beginning with the inner row in the circle, and moving out in a circular pattern, screw individual flicker bulbs into each socket carefully. Do not bump bulbs together or brush against them, as it may damage the fragile nature of the wiring system. Use extreme caution when handling flicker bulbs.
Flicker Bulbs
Flicker Bulb
(installed)
8
