CANDELIER™
POWER
The POWER button is normally left in the on position. Always turn the power off during cleaning or servicing the fan and during thunderstorms. It is also used to exit or enter additional programs.
POWER must be left on to retain a previously set fan speed.
SPEED CONTROL
There are four individual speed settings for the fan; each speed is indicated by an audible tone of increasing pitch.
To select the desired fan speed:
1.With fan off, press and hold the button labeled FAN. The fan blades will start rotating at the slowest speed, and will increase in steps
2.Release the button when the desired speed is reached.
The fan speed is now in memory and will automatically come on at the same speed each time the FAN button is used. To maintain this level of speed, turn the fan on by pressing FAN less than one second. To lower speed, turn fan off, the non by pressing and holding the FAN button until the desired speed is reached. When the fan is on, you may increase the speed by pressing and holding the FAN button until the desired speed is reached, then release it.
FAN CONTROL
ON - OFF
A momentary press of the FAN button
TO CHANGE SPEED Press and hold FAN button longer than one second
REVERSING AIRFLOW
The direction of airf low can be changed from downward to upward or from upward to downward.
To reverse the airflow:
1.Make sure the FAN is on.
2.Press the REVERSE button.
NOTE: A
LIGHT
To turn the lights off and on, press and release the LIGHT button for less than one second.
LIGHT CONTROL
ON - OFF
A momentary press of
the LIGHT button
11
