To perform manual receive
Receiving
Receive successful
l | l l l l | l | l | |
l |
|
| l | |
|
|
| l | |
l |
|
|
| |
l |
| l | l | |
| l | l l l |
| |
|
|
|
| |
1.Enter the Receive Mode (page
2.Place the watch on a stable surface so its 12 o’clock side is facing towards a window (page
3.Hold down A for about two seconds until RC
starts to flash on the display.
•Time calibration signal reception takes from two to seven minutes. Take care that you do not perform any button operations or move the watch during this time.
•If the receive operation is successful, the reception date and time appear on the display, along with the GET indicator.
The watch will enter the Receive Mode if you press A or if you do not perform any button operation for about one or two minutes.