To turn auto receive on and off
l | l l l l l |
| ||
|
| l | ||
l |
|
| l | |
l |
|
|
| l |
l |
|
|
| l |
l | l l l l | l |
| |
|
|
|
| |
On/Off status
1.Enter the Receive Mode (page
2.In the Receive Mode, hold down E until the current auto receive setting (ON or OFF) starts to flash. This is the setting screen.
•Note that the setting screen will not appear if the currently selected Home City is one that does not support time calibration reception.
3.Press A to toggle auto receive on (ON) and off (OFF).
4.Press E to exit the setting screen.
•For information about city codes that support signal receive, see “To specify your Home City” (page