To select an Altimeter Mode display format
Display format number
l | l l l l |
l | |
l | l |
l | l |
| |
l | l |
l l l l | |
Display Format
Selection Screen
1.In the Altimeter Mode, hold down E for about two seconds until either OFF or the current reference altitude value starts to flash. This is the setting screen.
2.Press D twice to display the format selection screen.
•The number of the currently selected format (1 through 4) will flash on the display.
3.Use A (+) and C
•The contents of each of the Altimeter Mode display formats are shown below.