Casio 3069 To select the altitude measurement type

To select the altitude measurement type

Altitude measurement type

l	l	l		l l l	l	l
						l
l
						l
l							l
l						l	l
l
					l
	l		l l l l

1.In the Altimeter Mode, hold down E for about two seconds until either OFF or the current reference altitude value starts to flash. This is the setting screen.

2.Press D to display the current altitude measurement type setting.

•This will cause either 0'05 or 2'00 to flash on the display.

3.Press A to toggle the altitude measurement type setting between 0'05 and 2'00.

•0'05: Readings at five-second intervals for one hour

•2'00: Readings at five-second intervals for the first three minutes followed by two- minute intervals for approximately nine or 10 hours thereafter

4.Press E to exit the setting screen.

E-67