l | l |
l |
|
l |
|
l |
|
l | |
l |
|
|
l l | ||
| l | |
|
| l |
l l | l | l |
|
| |
1.In the Digital Compass Mode, hold down E for about two seconds until the magnetic declination angle value starts to flash. This is the setting screen.
2.Press D twice to display the bidirectional calibration screen.
•At this time, the north pointer flashes at the 12 o’clock position to indicate that the watch is ready to calibrate the first direction.
3.Place the watch on a level surface facing any direction you want, and press C to calibrate the first direction.
•xxx is shown on the display while calibration is being performed. When calibration of is successful, the display will show OK and x2x, and the north pointer flashes at the 6 o’clock position. This means that the watch is ready for calibration of the second direction.
4.Rotate the watch 180 degrees.
5.Press C again to calibrate the second direction.