3.Place the watch on a level surface, and position it so that its 12 o’clock position points north (as measured with another compass).

4.Press C to start the calibration operation.

•---is shown on the display while calibration is being performed. When calibration is successful, the display will show OK and the Digital Compass Mode (with 0° shown as the angle value).

•If ---appears and then changes to ERR (error) on the calibration screen, it means that there is something wrong with the sensor. When ERR disappears after about one second, try performing the calibration again. If ERR keeps appearing, contact your original dealer or nearest authorized CASIO distributor to have the watch checked.

E-45