Applying Effects to Tones
Changing the Settings of REVERB
Parameters
You can control the relative strength of a reverb and how it is applied. See the following section titled “REVERB Parameters” for more information.
1. After selecting the reverb type you want, use the [ ] and [ ] CURSOR buttons to display the parameter whose setting you want to change.
•This displays the parameter setting screen. Example:
To set the Reverb Time parameter
SR v T i me
2. Use the [+] and
zER Level
Same as Reverb Type
zHigh Damp
3. Press the EFFECT or EXIT button.
• This returns to the tone or rhythm selection screen.
REVERB Parameters
Reverb effects are associated with either a reverb type or delay type. Parameter settings depend upon the associated type.
Reverb Type (No. 0 to 5, 8 to 13)
zReverb Level (Range: 000 to 127)
Controls the reverb size. A larger number produces larger reverb.
zReverb Time (Range: 000 to 127)
Controls how long reverb continues. A larger number produces longer reverb.
zER Level (Initial Echo Sound) (Range: 000 to 127)
This parameter controls the initial reverb volume. The initial echo sound is the first sound reflected from the walls and ceiling when a sound is output by this keyboard. A larger value specifies a larger echo sound.
zHigh Damp (Range: 000 to 127)
Adjusts the damping of high frequency reverberation (high sound). A smaller value damps high sounds, creating a dark reverb. A larger value does not damp high sounds, for a brighter reverb.
Delay Type (No. 6, 7, 14, 15)
zDelay Level (Range: 000 to 127)
Specifies the size of the delay sound. A higher value produces a larger delay sound.
zDelay Feedback (Range: 000 to 127)
Adjusts delay repeat. A higher value produces a greater number of repeats.