DSP Algorithm List

2:Feedback (Range: 0 to 127) Adjusts the repeat of the reverb.

3:High Damp (Range: 0 to 127)

Adjusts damping of the high-range reverb sound.

The smaller the value, the greater the damping of high-range reverb sound.

4:Diffusion (Range: 0 to 127)

Provides fine adjustment of the reverb.

5:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

6:Dry Level (Range: 0 to 127)

Adjusts the level of the original sound.

25:Reflection

•Function

This is an effector that extracts the first reflected sound from a reverb sound.

•Parameters

0:Type (Range: 0 to 7)

Selects from among the eight available reflection patterns.

1:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

2:Feedback (Range: 0 to 127)

Adjusts the repeat of the reflected sound.

3:Tone (Range: 0 to 127)

Adjusts the tone of the reflected sound.

26:Flanger

•Function

This is a flanger in accordance with a sine wave LFO.

•Parameters

0:LFO Rate (Range: 0 to 127) Adjusts the rate of the LFO.

1:LFO Depth (Range: 0 to 127) Adjusts the depth of the LFO.

2:Feedback (Range: –64 to 0 to +63) Adjusts the feedback of the sound.

3:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

27:Reverb

•Function

This is an effector that preserves the breadth of a sound by adding a reverb sound.

•Parameters

0:Tone (Range: 0 to 127)

Adjusts the tone of the reverb sound.

1:Time (Range: 0 to 127) Adjusts the reverb time.

2:High Damp (Range: 0 to 127)

Adjusts damping of the high-range reverb sound.

The smaller the value, the greater the damping of high-range reverb sound.

3:ER Level (Range: 0 to 127)

Adjusts the level of the initial reflection.

4:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

28:2-Tap Delay

•Function

This is left/right 2-tap delay.

•Parameters

0:Delay Time (Range: 0 to 127) Adjusts the delay time.

1:Wet Level (Range: 0 to 127)

Adjusts the level of the effect sound.

2:Feedback (Range: 0 to 127) Adjusts the repeat of the delay.

3:High Damp (Range: 0 to 127)

Adjusts damping of the high-range delay sound.

The smaller the value, the greater the damping of high-range delay sound.

4:Ratio L (Range: 0 to 127)

Adjusts the delay time of the left channel. Proportional to the value set for Delay Time.

5:Ratio R (Range: 0 to 127)

Adjusts the delay time of the right channel. Proportional to the value set for Delay Time.

‰The following “Multi” algorithms are used in combination with the algorithms described above. Parameters are shared by both types of algorithms.

M00 :Multi00 (Sin 2-Phase Chorus – 2-Tap Delay)

•Function

This is a multi effector that is related to Sin 2-Phase Chorus – 2-Tap Delay.

•Parameters

0:Chorus LFO Rate

1:Chorus LFO Depth

2:Chorus Feedback

3:Chorus Wet Level

4:Delay Time

5:Delay Wet Level

6:Delay Feedback

7:Delay High Damp

M01 :Multi01 (3-Phase Chorus – 3-Tap Delay)

•Function

This is a multi effector that is related to 3-Phase Chorus – 3-Tap Delay.

•Parameters

0:Chorus Rate 1

1:Chorus Depth 1

2:Chorus Rate 2

3:Chorus Depth 2

4:Chorus Wet Level

5:Delay Time

6:Delay Wet Level

7:Delay Feedback

M02 : Multi02 (Phaser – 3-Phase Chorus)

•Function

This is a multi effector that is related to Phaser – 3-Phase Chorus.

•Parameters

0:Phaser Resonance

1:Phaser Manual

2:Phaser Rate

3:Phaser Depth

4:Chorus Rate 1

5:Chorus Depth 1

6:Chorus Rate 2

7:Chorus Depth 2

M03 : Multi03 (Flanger – 2-Tap Delay)

•Function

This is a multi effector that is related to Flanger – 2-Tap Delay.

•Parameters

0:Flanger LFO Rate

1:Flanger LFO Depth

2:Flanger Feedback

3:Flanger Wet Level

4:Delay Time

5:Delay Wet Level

6:Delay Feedback

7:Delay High Damp

M04 : Multi04 (Stereo Phaser – Stereo Delay 1)

•Function

This is a multi effector that is related to Stereo Phaser – Stereo Delay 1.

•Parameters

0:Phaser Resonance

1:Phaser Manual

2:Phaser Rate

3:Phaser Depth

4:Phaser Wet Level

5:Delay Time

6:Delay Wet Level

7:Delay Feedback

E-86

707A-E-088A