Using the SMF Player

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Use the [+] and [–] buttons or the number buttons

Playing Back an SMF

to adjust the SMF volume.

 

 

 

 

 

 

To play back an SMF

1. Press the SMF PLAYER button to display the file selection screen.

•This causes the SMF player pointer to appear on the display.

•SMF are those whose file names end with the extension “MID”. An error message appears at this time if there are no SMF files currently in Flash Memory.

2.Use the number buttons to input the three-digit file number of the file you want to play.

•The name of the currently selected file will appear in the text area of the display. The file number is shown in the number area of the display. The Tempo/ Measure area of the display shows the size of the file in kilobytes.

•You can also use the [ ] and [ ] CURSOR buttons or [+] and [–] buttons to change the file.

3.Press the START/STOP button.

•This starts playback of the selected file.

•You can use the TEMPO buttons to adjust the tempo within the range of 30 to 255.

•You can turn channels 1 through 16 on and off, regardless of whether file playback is in progress or stopped. For more information, see “Turning Channels On and Off” on page E-36.

•You can specify a setting in the range of 000 (minimum) to 127 (maximum).

•Pressing [+] and [–] at the same time returns the SMF volume setting to 100.

•Note that this setting does not affect the volume of the notes you play on the keyboard.

Configuring Other Settings

To configure other settings

1. While playback is stopped, select the file you want to play back.

•Perform steps 1 through 2 under “To play back an SMF” to select a file.

2.Press the [ ] CURSOR button to display a screen for selecting the part you want to play on the keyboard (play along part).

•Use the [ ] and [ ] CURSOR buttons or the [+] and [–] buttons to select the play along part.

•Press the MIXER button to enter the Mixer Mode.

•Turn off the channel that corresponds to the play along part you selected above. See “Turning Channels On and Off” on page E-36 for more information. Performing this step turns off the applicable part so you can play it on the keyboard along with the rest of the SMF playback.

4. To stop file playback, press the START/STOP button again.

Adjusting SMF Playback Volume

The following procedure explains how to control the overall volume of SMF data playback. You can adjust volume while playback is stopped or ongoing.

1. Press the ACCOMP VOLUME button.

•This causes the “SMF Vol.” indicator to appear on the display, along with a value that indicates the current SMF volume setting.

•Entering the SMF Player Mode initializes all parts by turning on all Mixer Mode channels.

•After configuring Mixer Mode settings, press the MIXER button or EXIT button to return to the SMF Player Mode.

3. Press the [ ] CURSOR button to display the playback mode selection screen.

•Use the [ ] and [ ] CURSOR buttons or the [+] and [–] buttons to select the playback mode.

•You can select from among the following four playback modes.

S1: One file, one time

SL: One file, repeat

A1: All files, one time

AL: All files, repeat

707A-E-075A

E-73