• See the list on page A-13 for information about the equalizer types that are available.
Example:
To select Jazz
J a z z
• Pressing the EXIT or EFFECT button exits the equalizer setting screen.
Press the [
] CURSOR button.
3.
4. Use the [+] and [–] buttons or the number buttons to select the equalizer type you want.
• This displays the equalizer editing screen.
• The equalizer type setting (step 4) screen will appear automatically about fives seconds after you press the button.
] CURSOR button three times.
Press the [
2.
Specifies the undulation depth of the chorus sound. A higher value produces deeper undulation.
• Whether or not an effect is applied to the parts that are sounding also depends on Mixer Mode Reverb Send, Chorus Send, and DSP on/off settings. See “Mixer Function” on page E-36 for more information.
Using the Equalizer
This keyboard has a built-in four-band equalizer and 10 different settings from which you can choose. You can adjust the gain (volume) of all four equalizer bands within the range of –12 to 0 to +12.
To select the equalizer type
1. Press the EFFECT button so the pointer appears next to EFFECT on the display screen.
Chorus Depth (Range: 000 to 127)
Chorus Rate (Range: 000 to 127)
Specifies the undulation speed of the chorus sound. A higher value produces faster undulation.
Chorus Level (Range: 000 to 127) Specifies the size of the chorus sound.
CHORUS Parameters
Applying Effects to Tones
To adjust the gain (volume) of a band
1. After selecting the equalizer type you want, use the [ 
] and [ 
] CURSOR buttons to select the band whose gain you want to adjust.
Example:
To adjust the HIGH band
ME q H i g h 
2. Use the [+] and
Example:
To adjust the gain to 10
ME q H i g h 
•Pressing the EXIT or EFFECT button exits the equalizer setting screen.
•Changing to another equalizer type causes the band gain settings to change to the initial settings for the newly selected equalizer type automatically.