Registration Memory

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setup Names

 

To Save a Setup in Registration

 

You can assign setups into one of 32 areas, which you can

 

Memory

 

select using BANK buttons 1 through 4 and the four

 

 

REGISTRATION buttons. Area names range from 1-1

 

1. Select a tone and rhythm, and otherwise set up the

 

through 8-4 as shown below.

 

 

 

 

 

 

 

 

 

 

 

 

keyboard the way you want it.

 

 

 

 

 

 

 

 

 

 

 

• See “Registration Memory Features” on page E-46 for

 

 

 

 

 

 

 

 

 

 

 

details on what data is stored in the registration

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

memory.

 

 

 

 

 

 

 

 

 

 

 

2. Use the BANK button or the number buttons to

 

 

 

 

 

 

 

 

 

 

 

select the bank you want.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• If you do not perform any operation for about five

 

 

 

 

 

 

 

 

 

 

 

seconds after pressing the BANK button, the display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

returns to the contents in step 1, above.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Bank 1 selected.

 

 

 

 

 

 

 

 

 

 

 

1Use the BANK button to select the bank. Each press of BANK cycles through the bank numbers from 1 to 8.

2Pressing one of the REGISTRATION buttons (1 to 4) selects the corresponding area in the currently selected bank.

•Whenever you save a setup and assign it a setup name, any setup data previously assigned to that name is replaced with the new data.

•You can use the keyboard’s MIDI capabilities to save your setup data to a computer or other external storage device. See “Using the Music Data Management Software (on the Bundled CD-ROM)” on page E-76 for details.

B a n k

3. While holding down the STORE button, press a REGISTRATION button (1 to 4).

•The following display appears when you press the 2 button.

S t o r e

4. Release the STORE and REGISTRATION buttons.

•The setup is saved as soon as you press a REGISTRATION button in step 3, above.

707A-E-049A

E-47