Loading

1.Turn over the Handheld Terminal.

2.Remove the battery pack cover as follows:

Slide the left and right lock switches for the battery pack cover to the “FREE” position.

Hook your fingertips into the notches in the Handheld Terminal and lift the battery pack cover up in the direction indicated by the arrow.

Notch

Notch

3.Load a battery pack (HA-G20BAT). Take care that the battery pack is oriented correctly when you load it. In addition, load the battery pack while making sure that the end of the battery pack removal tape is protruding above the battery pack.

4.Put back the battery pack cover in the compartment as instructed by the arrows,

and in the illustration and then return the battery pack cover lock switches to the “LOCK” position.

E-19