Important !

ξNever short out the power contacts of the Cradle-type Battery Charger. This can damage the Cradle-type Battery Charger.

ξAllowing the power contacts become wet can cause an electric shock or fire. In addition, if the contacts become soiled, contact may be impaired resulting in poor charging. For reasons of safety and maintaining charging battery pack(s) in optimum condition, clean the power contacts by wiping with a dry cloth or cotton swab after disconnecting the AC adaptor.

ξWhen placing the DT-X30 into the cradle, make sure that it is seated properly and that the power LED at the front of the Cradle-type Battery Charger is lit in green. Charging and communication will not proceed properly if the Handheld Terminal is not seated properly.

Specifications

1. Charging Specifications

 

Charging Method:

Constant current/voltage (the charging circuit is built in

 

DT-X30)

Charge Period:

Approximately 5 hours

2. Power Supply

 

Power Source:

AC adaptor (AD-S42120B*)

Consumption Current:

12V DC 2.6A

Output to Handheld Terminal:

9.5V DC 2.7A (max.)

3.AC Adaptor

Model:AD-S42120B

Input:

100V to 240V AC 50/60Hz 1.2A

Output:

12V DC 3.5A

4. Dimensions and Weight

 

Dimensions:

Approximately 120(W) υ 144(D) υ 129(H) mm

 

(4ε"W υ 5ε"D υ5ε"H)

Weight:

Approximately 300g (10.6oz)

5. Operating Environment

 

Temperature:

0°C to 40°C (32°F to 104°F)

Humidity:

30% to 80% RH (non-condensation)

* See page 44.

 

E-49