Charging the Battery Pack

To charge the battery pack, use one of the cradles and the battery chargers following the procedure described below. Be sure to use the separately sold AC adaptor (AD- S42120B-N) to power the cradle or charger.

Or, if you use the Car Mounted-type Battery Charger in a vehicle, use the accompanied Car Power Cable to power the charger.

USB Cradle/Ethernet Cradle/Cradle-type Battery Charger

The power LED on the front of the Cradle will light green if the Handheld Terminal has been properly mounted.

Status of Indicator 1 on DT-X30:

Orange: Charging

Red: Standby due to battery pack error or the surrounding temperature is out of the charging temperature range

(charging begins when the temperature is within the charging temperature range) Green: Charging complete

Dual Battery Charger

Taking care that the battery pack is oriented correctly, insert it into the Dual Battery Charger.

This causes the Charge Indicator LED to light in red, indicating that charging has started.

Status of Charge Indicator LED

Off:

Not charging

Red:

Charging

E-21