Attaching the Hand Belt

The hand belt can be used to prevent the Handheld Terminal from dropping when carrying it around. Attach the hand belt according to the procedure described below.

To attach the hand belt

1.Thread the belt through the hand belt hole as shown in the figure. Then fold it back and secure using the hook-loop fastener.

2.Thread the other end of the belt through the hand belt hole and adjust the length so that it fits comfortably on your hand. Then secure using the hook-loop fastener.

Important!

ξStick the hook-loop fastener down straight.

ξEnsure that the folded-back part does not overlap. See "Bad" example at right.

Good

Bad

Bad

E-23