Handling microSD Cards

The Handheld Terminal supports microSD card.

Since the microSD card slot is located inside the battery pack compartment, first remove the battery pack when installing or removing a microSD card.

Refer to pages 18 to 20 for information on “Loading and Removing the battery pack”. Install (or replace) a microSD card according to the procedure described below.

Installing

1.Check that the power is turned off. If the power is on, always make sure to turn it off by pressing the Power Key.

2.Remove the battery pack.

3.Insert the microSD card with the top of the card (containing lettering) facing up by properly aligning with the slot.

ξAlthough some resistance may be felt when the card is inserted, gently insert the card all the way into the slot until it contacts the back of the slot.

ξDo not push in the card on the angle.

4. Load the battery pack.

E-33