ξDo not subject the Handheld Terminal and Ethernet Cradle to vibration or impact during communication. This can cause communication to be interrupted.

ξWhen placing the DT-X30 into the cradle, make sure that it is seated properly and that the power LED at the front of the Ethernet Cradle is lit in green. Charging and communication will not proceed properly if the Handheld Terminal is not seated properly.

ξAlways cap ports that are not being used. Using the Ethernet Cradle while the ports are uncapped can cause damage.

Specifications

1.LAN Specifications

Communications protocol: IEEE 802.3

 

Media type:

10base-T/100base-TX auto-switched

2.

USB

 

 

Protocol:

USB Ver1.1 Standard

 

Transmission Rate:

12Mbps (max.)

3.

Charging

 

 

Charging Method:

Constant current/voltage (the charging circuit is built in

 

 

DT-X30)

 

Charge Period:

Approximately 5 hours

4.

Power Supply

 

 

Power Source:

AC adaptor (AD-S42120B*)

 

Consumption Current:

12V DC approximately 3.0A

 

Output to Handheld Terminal:

9.5V DC 2.7A (max.)

 

USB Host Output:

5V DC 0.5A (max.)

5.

AC Adaptor

 

 

Model:

AD-S42120B

 

Input:

100V to 240V AC 50/60Hz 1.2A

 

Output:

12V DC 3.5A

6.

Dimensions and Weight

 

 

Dimensions:

Approximately 120(W) υ 144(D) υ 129(H) mm

 

 

(4ε"W υ 5ε"D υ 5ε"H)

 

Weight:

Approximately 300g (10.6oz)

7.

Operating Environment

 

 

Temperature:

0°C to 40°C (32°F to 104°F)

 

Humidity:

30% to 80% RH (non-condensation)

*See page 44.

E-47