
Configuring Handheld Terminal Settings
Calibrating Touch Screen Alignment
Whenever the response of the touch screen is poor, or the operations being executed do not match with the location you are tapping on the touch screen, please recalibrate the alignment of the touch screen using the following method.
ξPress the “Fn” key and then press the “4” key after confirming that “F” is displayed in the lower right corner of the screen. The following screen is displayed. (Windows CE models)
You can also display this screen by navigating as follows:
Windows CE models: Start Settings Stylus
Calibration
Windows Mobile models: Start Settings System
Screen Align Screen
For Windows Mobile models, the screen is different.
ξPress the stylus against the center of the target mark (+ mark) as indicated on the screen. The screen shown below appears after you press the stylus against the target at five different locations.
For Windows Mobile models, the screen is different.
ξPress the Enter key or tap anywhere on the touch screen. (Windows CE models)